Newlumen
(Newlumen)
August 11, 2018, 11:19pm
400
Yea… didn’t see it… anyhow… this is my first time ordering from intl-outdoor… how long does it take to shipped to US?
emarkd
(emarkd)
August 11, 2018, 11:46pm
401
It’s epacket, usually 12ish days in my experience but customs can hang things up longer if they want it to.
SKV89
(SKV89)
August 11, 2018, 11:48pm
402
My last two orders from Intl took about 2-3 weeks. The firs time I ordered from them took exactly a month. Mtn delivers faster if they have it in stock since they are in the US. Also if you buy from MTN, both Richard and Hank gets our support. With that said, I also ordered from Intl on day one because I was too excited.
aginthelaw
(aginthelaw)
August 12, 2018, 1:07am
403
Because he’s in the USA and it would get here faster
Yourrid
(Yourrid)
August 12, 2018, 5:20am
404
But is Richard getting his allotment of D4S’s prior to intl-outdoors shipping out all of the regular orders?
I figured Richard would get his D4S’s at nearly the same time everyone else did. Maybe a day sooner since he is a VIP in the flashlight world and all
It wouldn’t be the first time RMM’s customers got an Emisar product before Hank’s international customers. At least this time there shouldn’t be any need to do immediate bugfixes and a re-launch. The first D4 release was not the smoothest thing ever.
I got a $8.90USD refund from Hank, he ran out of batteries?
alex64
(alex64)
August 12, 2018, 9:12am
407
Mine is shipped without refund from battery. Maybe there are problems with sending batteries to Australia
fixed_it
(fixed it)
August 12, 2018, 1:08pm
408
It says on his website, under shipping, that he can’t ship them to Canada and Australia and will refund them instead.
DeusLight
(DeusLight)
August 12, 2018, 3:45pm
409
I just got a confirmation email saying my D4S has shipped from Intl-outdoors to the UK.
kuoh
(kuoh)
August 12, 2018, 4:22pm
412
Better remind them to put a few tie straps on it or one big wave and your D4S might end up testing the limits of the IPX rating.
KuoH
OK!! Mine’s on the way!
OK!! Mine’s on the way!
Which cells do you use in that?
gonna need bigger pockets…
Lexel
(Lexel)
August 12, 2018, 5:48pm
415
ToyKeeper:
I finally got time to mod my D4S a little. I swapped in the prototype’s MCPCB so it’s now a 3A tint instead of 1A, and I tried out the flashing vias. I can confirm it works, but you may need to hold it very still during flashing or place it on a table and not touch it. I just used some solid-core wire I had laying around which was small enough to fit into the vias. I think it was 24awg or 26awg.
So now instead of ~6500K with RampingIOS V3, it’s ~5100K with Anduril. And I didn’t have to take the driver out.
I still don’t have a good 26650 cell though, so I don’t know what the peak output is. It’s difficult to measure that many lumens anyway.
I think flashing pads with a pogo pin adapter is a better solution, only viases for the alignment pogo pins
I have started to put those slowly to my new driver designs
Oshpark 2Oz are 0.8mm thin, this should be enough
on chineese fab on panel I would go to 0.6mm
also made a programming adapter for my future drivers
same order in 2 Oz!
Fits those pogo pins from banggood
F.i.l.a.s
(F.i.l.a.s)
August 12, 2018, 6:44pm
416
Ordered D4S Green with Nichia.
Nichia leds will be pretty nice throwy in this flashlight, similar as XP-L Hi in D4, which is optimal for EDC light from my point of view.
joechina
(joechina)
August 12, 2018, 8:02pm
417
@lexcel
Wouldn’t it be better to have left an right traces on the side for the pogo pins?
trace ———
————- pin
trace ———
So they self center?
And how much are pogo pins with gold tips?
I now from ICT they are more reliable
joechina
(joechina)
August 12, 2018, 8:25pm
418
toykeeper (I am sure there was a post from here)
lexcel
found the pcb I remembered
https://easyeda.com/feather/ispogo-oA5nFXR93
and more
http://blog.spitzenpfeil.org/wordpress/2013/11/12/the-pogo-key-1-27mm-avr-isp-adapter-take-ii/
But instaed of 3x2
xxx
xxx
I would use a keyed 4x2
xxxo
xxox
to ensure always right connection
eas
(eas)
August 12, 2018, 9:18pm
419
Mine shipped on the 11th. No tracking code, yet. Grumble.