Wait, what LED is this?
That’s not the SST-20.
That’s the 219C, or another 90CRI 5000k LED.
Could you ask what LED is this?
CRI is on the high side for SST20 right? I will double check with them.
Something is not right with those test results
X=0.3366, Y=0.3222 results in a CCT of 5290K and an IMPOSSIBLY ROSY duv of –0.0119
A 90Cri 5000k emitter can either be the 219C or LH351D, both are known to be greenish tinted. I would much prefer a tint mixed SST-20 3500k with 6500k to produce a tint similar to the 219B 9080 and still have 80+ CRI.
I mean, that duv could be possible with FA3 emitters.
However, that CCT has to be a 219C or LH351D.
Maybe they managed to get Digikey’s high CRI LH351D 5000k that I found last year?
Absolutely impossible with FA3 emitters. FA3 may be able to achieve –0.00119 but not –0.0119, which will make Cree 3D and 219B 9080 look green
Wait, I just noticed too.
That duv is insanely low.
Are they taking the measurements with the red LEDs for some reason?
Interested.
I have a tint mixed sst-20 FA3 / 6500k setup in my EDC and while it looks good it is not nearly that rosy.
Hi,
I’m interested !
I am interested and want to be added to the group buy list
Interested. Please and thank you!
Interested
Interested
Good, now we all want to make our orders ASAP :D
:BEER:
- SAM -
Photos win. Add me to the list.
Interested
Photos look great. I’m wondering did they change the optics? The original MF01 had a big hotspot with almost no spill. This one seems to have alot of spill.
FYI, the above tint spectrum sheet that was posted is really strange. That light is supposed to be an SST-20 6500k 70cri setup, so no idea how he is getting those readings.
This is the review it is from: http://tieba.baidu.com/p/6177807888