Jerommel
(Jerommel)
January 14, 2020, 4:46am
294
1st run on Lii-500 NOR test (4.2 - 2.8 Volts)
[1] 711 mAh
[2] 721 mAh
[3] 750 mAh
[4] 742 mAh
Doing second run now.
……
Okay, 2nd run finished.
I swapped the cells in the charger, so that [1] was now in slot 4, [2] in slot 3, [3] in 2 and [4] in 1.
[1] 732 mAh
[2] 747 mAh
[3] 737 mAh
[4] 734 mAh
So it seems there is some difference between the slots of the charger.
Average of 1st run: 731 mAh
Average of 2nd run: 737.5 mAh
It’s ridiculously late here, so i put them in for a 3rd run, i’ll see the results tomorrow.
I put some nickel plated neodymium magnets on the minuses to increase the force of the clamping of the slots.
I must sleep now.
See you tomorrow.
Jerommel
(Jerommel)
January 23, 2020, 5:57pm
295
Oh, i forgot about this… ^
The last NOR run was a little better, but not a lot.
I wrote down the results, but i can’t find it anymore…
Anyway, AliExpress page of the new INR14500 shows the graph but it now says “HKJ test” above it.
Hmmm….
mortuus
(mortuus)
January 23, 2020, 6:48pm
296
hm so not really close the stated 1000mah then? should be marked 800mah then imo.
id30209
(id30209)
January 28, 2020, 4:38pm
297
Mooch said he'll run some tests on 14500 10A :))
Would these work in the GT Micro or is 10amps to much for it? I am using the gold 14500 vapcells and they seem much better then my Efest 700mah in my GT Micro.
Thanks ,H10 14500 10A have much power than gold 14500
Barkuti
(Barkuti)
March 10, 2020, 5:00am
301
Correction: “H10 14500 10A has much more power than gold 14500”.
I just want to make sure its not to much power for the GT Micro, I would hate to smoke the emitter
Thanks for correcting. my English is very poor :person_facepalming:
Th558
(Th558)
March 10, 2020, 4:07pm
304
If these H10 graphs are correct does that mean we could get around 2500 lumens with an XHP50.2 in an SP10S/Tool AA?
Di_Joker
(Di_Joker)
March 10, 2020, 7:23pm
305
I like the train of your thoughts )))
SKV89
(SKV89)
March 10, 2020, 8:12pm
306
With this new Vapcell H10 cell, we really need to see some new 14500 lights that can take advantage of it.
djozz
(djozz)
March 10, 2020, 9:02pm
307
I’m rebuilding my previously ruined Tool AA for it atm: FET driver and LH351D. But I could not resist a sliced 3500K 90CRI one because of the tint. I’m halfway the build but it looks like I’m going over 1000 lumens of 93CRI below BBL. (and very hot fingers).
djozz
(djozz)
March 11, 2020, 4:15pm
308
My purple Efests are getting old I guess…
Barkuti
(Barkuti)
March 12, 2020, 4:11pm
309
I indirectly inquired Mooch about this very recently here aand, wellp, unless Vapcell or someone else sends him a couple samples, seems that ain't happening in a near future.
id30209
(id30209)
March 12, 2020, 4:12pm
310
Barkuti:
I indirectly inquired Mooch about this very recently here aand, wellp, unless Vapcell or someone else sends him a couple samples, seems that ain't happening in a near future.
He bought them over a month ago...
SKV89
(SKV89)
March 12, 2020, 4:32pm
311
Vapcell said the H10A is sold out and production will not resume until May due to virus. Lucky I decided to buy some and not wait for Mooch review. From Djozz mah measurements these are not the same as Shockli 14500, which I was suspecting it might be
Barkuti
(Barkuti)
March 12, 2020, 6:58pm
312
id30209 , I also opened this New 14500 li-ion development: Vapcell INR14500 H10 “1000mAh 10A” thread nearly two months ago @ ECF. I wonder why Mooch said “Sorry, I haven’t heard anything about that cell” .
id30209
(id30209)
March 12, 2020, 7:13pm
313
I asked him also but he’s all into vaping and don’t care much about this tiny cells. He did order them anyhow just for fun
I’ll jump to that link as soon as i land.