Actually the short tube option was added Feb, 3rd. So, yesterdays numbers should be considered .
Thro:is see If the TK edition just got 103 ālikesā. if it gets made, will it have the updated Lume1 driver and aux lights ?
Still wondering if this would be possible :question:
I assume it wonāt be possible to get it with a Lume1 driver and aux LEDs as that would increase the cost, and as far as I know Neil doesnāt build-to-order like Simon. However if there is an option to get a Lume1 pre-installed Iāll definitely take it.
As long as itās one of the lume1 drivers with MOSI/MISO around the right way, not like the first batch. Still a bit dirty about that.
Thro: Thro:is see If the TK edition just got 103 ālikesā. if it gets made, will it have the updated Lume1 driver and aux lights ?
Still wondering if this would be possible :question:
I assume it wonāt be possible to get it with a Lume1 driver and aux LEDs as that would increase the cost, and as far as I know Neil doesnāt build-to-order like Simon. However if there is an option to get a Lume1 pre-installed Iāll definitely take it.
I would too and would be willing to pay extra for the driver. Iām waiting to see if the lights even get made.
true
lets see which bodies are gonna happen and then we look what o put in them ;)
Are you saying black has a chance??
As long as itās one of the lume1 drivers with MOSI/MISO around the right way, not like the first batch. Still a bit dirty about that.
Good point, and hopefully the correct resistor values for the aux LEDs too although Iām planning something like loneoceansā pink/cyan/warm white triLED combo for my purple shorty.
That too! I still havenāt done anything with my first-gen driver because of those two issues. Blah.
I will pay extra for the Lume1 driver and aux LEDs
I will pay extra for the Lume1 driver and aux LEDs :+1:
Ditto if the flash pads are placed correctly
Neal said there will be no print on the colors
Not all heroes wear capes.
Neal said there will be no print on the colors
I just noticed that the man^ Said ācolorSā. That is multiple, right? Like purple andā¦ā¦.?
Looks like Iāll be dropping some cheddah
I just saw this post and wondering if itās still possible to get on the list?
If yes, Iām in for 2 Purple FW3A and 2 Purple 18350 tubes.
Sti.N.Gear.Usa
There is a fill-in form in the OP where you can choose the colors, quantity and optional short tube
Are you saying black has a chance??
Sure.
:smiling_imp:
Artiet59:Are you saying black has a chance??
Sure.
:smiling_imp:
uhm :confounded: well then i guess any color is possible
Chucked a late vote on raw. Iād prefer tan sand but if raw comes out with new driver+aux and xpl-hi NW Iām there!
Artiet59:Are you saying black has a chance??
Sure.
:smiling_imp:
Thatās what I figured. I think Iām going to paint mine camo.
Chatika vas Paus
There is a fill-in form in the OP where you can choose the colors, quantity and optional short tube
Yes I filled out the form already but was just concerned about the list ending on Feb 28th.
Just putting it out there, If Iām unable to get on the list Iām serious about purchasing a Purple tk edition and Purple 18350 tube from a fellow blf member.