Hello everyone.
I got a Jetbeam TCR10 second hand and the wires were mixed and cut, so only the main LED was working.
I fixed the connections but the color mode and strobe does not work well.
The problem is as follows:
When I twist 1 position to the left of off, it should do red or blue, alternating every time it is turned on, but it does nothing.
Then when I twist 2 positions left of off, it works as it should, doing red / blue / white strobe.
When I return to 1 position left from off, after being 2 positions left of off, it keeps doing red / blue / white strobe.
Do I have a faulty driver?
I also tried with an external magnet, in case my magnet was faulty and I get the same.