[WTS] 32650 Batteries 5500mAh, BTU ShockerVN, 3.2W 445nm MagLite, Custom P60 Hosts, Laser Hosts, etc......

25 posts / 0 new
Last post
Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass
[WTS] 32650 Batteries 5500mAh, BTU ShockerVN, 3.2W 445nm MagLite, Custom P60 Hosts, Laser Hosts, etc......

I had a few FS thread out there and I’m selling more but figured I’d put them all into one place

(2) 32650 Feilong 5500mAh cells- Bought these from a seller over on LPF when I got one of his MagLite kits (for sale below as well). They are the green wrapper ones, not the “bad” grey ones. Button tops, not sure if they are protected or not. Still on factory charge, literally only used in the MagLite for maybe 30 min tops! Asking $45 shipped

3.2W 445nm MagLite 2D- Bought with the batteries above. Built the laser over the winter with a 9mm diode, 2.3A X-Drive driver. Massive aluminum heat sink with the driver bonded to the bottom of it for added duty cycle (easily can do 5 minutes). Tail spring has been modded to allow for use of 32650 cells. Comes with (2) 22650 TF Flame cells but will make a deal including the 32650 cells if you want (separated them since not many people have the ability to charge 32650 cells)- Asking $250 shipped for this week (was asking $300 on LPF)

BTU ShockerVN- Bought as a shelf queen last winter. Love it so much I almost bought a second one! Hate to sell this but want money for bills. If it doesnt sell then I’ll be happy to keep it Smile Standard Vinh mod on the BTU Shocker, info can be found HERE Retails for around $225 iirc. The face is colored RED and has the V54 engraved on the head. Comes with everything from Vinh (box included). Asking $180 shipped (shipping wont be cheap for me)

10x Custom P60 hosts / Laser Hosts- These started their life off as standard C6 hosts. They were sent to a machine shop to have heat sinks made for them to be used a laser kits. While they were there they were all stripped, prepped and coated with a new HA III anodizing. Various colors as shown below, one is polished and then clear anodized. Machinist also made custom focus adapters for use with laser kits. Can sell them as just P60 hosts OR with everything needed for laser kits. If you want to make them into a laser then all you’d need is a driver and diode. Includes host, heat sink, 5.6mm module, focus adapter, lens, lens spring and pill. $45/ea

(15) Copper C6 heat sinks- Great for your own C6 laser build or as an upgrade to an above kit (PM or post for upgrade package deal). Comes with set screw to hold module. Asking $10/ea shipped (Buy them all for a discount)

I also have a ton of other stuff I could sell from a Vinh Vostro Mvn, K50vn, Blackshadow Padme, Shadow SL3, various lasers, large aluminum case (currently has 10x C6 hosts in it), MANY Sanyo 2400mAh cells (believe they are 2400, could be 2600mAh. Need to look into what color ring is what mAh), SWM V11r, etc……

Package deals are available. Post here or PM with “Ill take xxx” and I will PM you with payment details. Sale is based on timestamps, FIRST post/PM has priority but please post something here like “PM Sent” so there isn’t an argument on who claimed what first (doubt there will be any but never know). PayPal ONLY at this time, unless buyer wants to send cash and wait the added time for me to get it.

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Edited by: Livinloud on 08/01/2014 - 21:55
Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Thought the 32650 cells were more in the shot than shown. Anyways they are the large green cells

Great shot to show the size of the BTU compared to a 2DMagLite (currently a laser though)

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Here is a nice little “Friday, I forgot to add pictures, BUMP

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Photo’s added. Photos of other items available on request, along with prices

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

The T-man
Offline
Last seen: 5 months 2 weeks ago
Joined: 07/19/2012 - 03:04
Posts: 246
Location: NorCal USA

bump for the Shocker….I can personally attest that IS a kickazz light… Glasses

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Yes it is! 4.5A to each LED which means 4500 lumen of flooded throwing power! I need to stop talking about it or I’ll remove it from the sale lol I will dearly miss that light……

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Bump it up

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Tuesday bump

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

Details and price on the Shadow SL-3? AMC 7135 based driver, xml2 emitters, condition?

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Shelf queen, xm-l2 emitters and no idea on the driver. Its all stock. Bought it wanting to sendbit to Vinh but he said he doesnt mod these so its sat in my safe ever since. This is one light im really on the fence about selling since its super bright and small. Always have run a MKNE cell in it

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

Well let me know. I'd prefer the amc based driver, but think the other can be modded too 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Is there an easy way to tell the driver without tearing it down?

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 7 hours 44 min ago
Joined: 04/11/2014 - 18:05
Posts: 4274
Location: The Motor City

Vn BTU shocker

KB1428 “Live Life WOT

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

I don't think so 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Well if you find out how to tell them apart then let me know. Ill see if I can remember where I bought it from. Not sure if that will help at all but for some reason SBFlashlights or something rings a bell…..m

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

How much you want for it? 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Just the flashlight or flashlight and battery? It has a MKNE cell in it now

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

Just the light, I got enough cells for now 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Adding my K50vn PDTc for sale. Bought new from Vinh with box 3 months ago. Used twice for less than 20 min combined. Throws for almost a mile! I can post photos to prove it. Its the throw king second to the TK61vn V2. I just dont use it enough to justify keeping it. I have about 50,000 lumen sitting on my shelf and only two hands so time to dwindle the collection down to what i really use

Pulsar, haven’t forgot about you, still debating the sale of the light. Going to see if i use it tonight and if not its all yours. I need to stop hording lights

EDIT- K50vn is only for sale if i cant get my hands on its replacement. This light isnt from the recent GB and doesnt have horrible mismatched ano like those lights. Slight finish difference when examined closely under warm light but not noticeable in normal circumstances

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

No rush, had an unexpected bill pop up Wednesday that are up all my funds for this week... 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Bump it

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Bump. Alot more stuff coming soon. Buying a new truck so need cash for down payment

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

Price for just the sl3? I may be able to buy now 

Livinloud
Livinloud's picture
Offline
Last seen: 9 months 3 days ago
Joined: 06/03/2013 - 21:03
Posts: 1268
Location: Mass

Okay, PM coming tomorrow. My X40 is arriving tomorrow and not sure if I am keeping one or the other but probably will be selling both.

LPF Member: Livinloud
Budget flashlight enthusiast turned into lumen freak

Pulsar
Pulsar's picture
Offline
Last seen: 3 months 5 days ago
Joined: 07/29/2011 - 00:41
Posts: 5848
Location: Maine

I got my x40 yesterday... It's a pretty impressive light, though I still think some more can be squeezed out of it