The color temp is definitely a cool white, but it’s not too bad. The typical Cree “rainbow” is present, with the spill light being much more blue than the hotspot. The AR lens may be contributing to this too.
Btw guys, for more/better pictures take a look at this review on CPF. He clearly has a better camera than me and beautiful lighting conditions.
My own pictures are courtesy of my cell phone, taken on a throw blanket spread across my living-room floor. Lighting is provided by my SP03 in ceiling bounce.
PD, can you run the 26700’s in this? I can run the Imren 26700’s in the Jax X6 and L2 with the new 2x26650 tube with out those copper washer’s. They pull .8 of an amp more then the Efest 3500 and 4200 in the L2 XHP50 4300k for 8amps, according to the Fluke 36. Get rid of the inner lead holes, around the mcpcb and have a full shelf. It would be nice to know if the reflector is the same size as the Jax X6, I have a couple extra mint smooth reflector’s. Thanks PD!
The internal shelf is right where the head starts to narrow down to meet the section that holds the button. There are 1 or 2 deep fins there, the deepest fins on the light.
Thanks. I don’t have anything on my radar at the moment, so I think I will get into that group buy if it happens. I haven’t gotten involved in one of those in a few years.
I don’t have the Javelot, but my understanding is that they are totally different lights. The Javelot is more of a dedicated thrower, whereas the S70 is more of a mid-range light with a wide beam profile. I believe the S70 is much bigger than the Javelot as well.