UPDATE:
Winners are Relic38 and Nightbird95!
_
Relic38 is just a very generous and helpful guy. Highly appreciated to have him in this community. I though he deserved to get some stuff. Its not that much though…
He will get the smaller package. 20g total weight.
I threw in an extra (not announced) bare XM-L U2, on top of 3 bare XM-Ls. 1 XR-E. Dual XP-G mcpcb. Two O-rings, Two tail caps.
FT 2 mode driver, East 092 with decent output but next mode memory and the driver crcuit from the Uniquefire UF-X6S.
Im sure he can “remove” the next mode memory function and give life to them.
I also know he is familiar with the V10+ driver, have lots of resistors and various stuff so Nightbird95 will probably enjoy all the other things more. He will get a lot of items! Ill try to get it all in a 50g envelope.
I know I said one international winner, and one from EU. But Nightbird95 convinced me with his post that he was a worthy winner.
Congratulations to both of them!
WOW… 1000 posts… Most of which have been posted in 2013. I have never been so active on a forum before! What a year, so far. I have been turned into a flashoholic nutter like a bunch of all the other crazy people here! Its been a fun journey! You guys are great!
2012 was a calm year. I bought 2 lights… In 2013, I got my eyes opened and saw the potential many lights had. I started to mod stuff. Its been a crazy journey, with a ton of packages coming my way.
I have tested a lot of parts, drivers, emitters etc etc… Some I liked, some, not so. I have been “saving up” a bit for this giveaway. For me, its not that much value in these parts, but Im sure someone can find value in a few of the items. Some of the drivers and emitters are just crap though.
Here are the parts in the giveaway (More have been added since picture was taken)
Drivers:
- V10+ 4A with ramping
Bought from IOS when they had them in stock, link to FT, this is more like a, up towards 3A driver, but it can be 3,5 with a good fresh battery before voltage sinks. It can be fun to play with.
Its potted with fujick.
- FT 2-mode
(Around 3 amp output on high if a fresh cell is used. Next mode memory)
- East 092 drivers from FT
This was more like 1,8A on high? Strobe and SOS is DD. Starts on high every time.
- East 092 drivers from FT
Close to 3 amps on high I think, with a good new charged cell. Next mode memory. Not sold as the East092. Not even sure if its the exact item that I link too.
-Driver circuit from Uniquiefire UV-6S
Various “junk” drivers:
- Driver from my NEW 612
- Driver from a C8 (with XR-E)
- 2x Hollow pills from different 3AA light with a crappy driver and a crappy led.
CW emitters:
3 bare XM-L
3 XM-Ls, one of which are de-domed in gasoline (currently sitting on 25mm mcpcbs)
3x XR-E on 16mm mcpcb
1x XR-E on 20mm star
1 XP-E on 16mm star
1x XM-L T6 (slightly damaged, nice for test bench)
1 XP-G (accidentally dedomed, I can not guarantee how good it is.)
Various
10x 0,12R resistors
10x 0.5R SMD resistors
10x 0,9R resistors
One 10 degree TIR-optic (Im pretty sure its 10 degree)
26,8mm glas lens
DC-FIX diffuser film (broadens beam on flashlights)
5x 21mm O-rings (I think that is the outer size)
A close to 17mm contact board
A 20mm contact board
A 20mm dual XP-G mcpcb.
Two blue tailcaps
Two black tailcaps
HOW TO WIN?
Im not sure how I will pick the winner.
But tell me why you deserve to win, or tell me what you would use one or several parts for.