Basen 18650 2100 mAh 30A (Sony US18650VTC4)

5 posts / 0 new
Last post
leaftye
Offline
Last seen: 1 year 1 month ago
Joined: 07/25/2012 - 17:43
Posts: 4278
Location: San Diego, CA
Basen 18650 2100 mAh 30A (Sony US18650VTC4)

 

Packaging

 

Photos

Top & bottomLabel pic #1Label pic #2Label pic #3

 

Discharge Graphs









 

Charging Graphs




 

Notes

Batteries provided from Basen Group.

To simplify testing and prevent mistakes, batteries in each test were charged at 0.5A.

The discharge tests at 10A & 20A uses a different procedure that may have up to 20% error.

This review will be updated with discharge capacity data from the Basen S2 charger and Opus BT-C3100.

The low mode should be lower.

MRsDNF
MRsDNF's picture
Offline
Last seen: 5 months 2 weeks ago
Joined: 12/22/2011 - 21:18
Posts: 13473
Location: A light beam away from the missus in the land of Aus.

Thanks again. Nice work.

 

djozz quotes, "it came with chinese lettering that is chinese to me".

                      "My man mousehole needs one too"

old4570 said "I'm not an expert , so don't suffer from any such technical restrictions".

Old-Lumens. Highly admired and cherished member of Budget Light Forum. 11.5.2011 - 20.12.16. RIP.

 

Ledsmoke
Ledsmoke's picture
Offline
Last seen: 1 year 7 months ago
Joined: 08/08/2011 - 16:05
Posts: 1995
Location: Denmark

Thank you for the review Smile

~ Ledsmoke ~

Dutch humor:

[quote=djozz]

 I do not think that the BLF-community ben

dazed1
dazed1's picture
Offline
Last seen: 1 year 2 months ago
Joined: 05/31/2013 - 11:16
Posts: 1557

Great review, you are doing great! 8)

Fenix TK61 MOD> resistor, transistors, copper heatsink, Artic Cooling MX4, dedome, 3A > 5.7A ~ 1700 lumens > (600.000cd)

leaftye
Offline
Last seen: 1 year 1 month ago
Joined: 07/25/2012 - 17:43
Posts: 4278
Location: San Diego, CA

Thanks guys!  I'm working on getting some equipment to improve the accuracy of the 10A & 20A tests, and test at much higher current to reveal the full capabilities of high current batteries. 

The low mode should be lower.