WTB: Skilhunt DS20 or H03 body tube and tailcap

5 posts / 0 new
Last post
ZozzV6
ZozzV6's picture
Offline
Last seen: 5 months 1 day ago
Joined: 03/24/2016 - 12:19
Posts: 2429
Location: Near to my soldering iron.
WTB: Skilhunt DS20 or H03 body tube and tailcap

Hi!
I want to mod my Skilhunt DS10 with a Fet+7135 driver to make a tube light with Andúril firmware but 16340 batteries are so weak. So I need a Skilhunt DS20 or H03 (any variant R/F/RC) body tube with the magnetic tailcap. I will buy defective H03 or DS20 also if that is the only I can get.

chadvone
chadvone's picture
Offline
Last seen: 3 days 16 hours ago
Joined: 08/28/2015 - 23:48
Posts: 2022
Location: Iowa

Do you have a short tube for the H03?

Where are you located?

Edit- we pmed about this didn’t we.
Edit2- I didn’t find any DS20’s during my search.

ZozzV6
ZozzV6's picture
Offline
Last seen: 5 months 1 day ago
Joined: 03/24/2016 - 12:19
Posts: 2429
Location: Near to my soldering iron.

I’m using Astrolux S41 short tube for my H03 some times but I don’t want to use that 18650 tube because I still need a tailcap and I often use the H03 with 18650 tube.
Yes we are talked about H03 and DS10 compatibility.

koppa
Offline
Last seen: 1 year 7 months ago
Joined: 11/17/2018 - 01:21
Posts: 8

I would recommend taking a look into this thread http://budgetlightforum.com/node/51362 . Multiple other tubes fit the light, maybe you find a viable alternative.

ZozzV6
ZozzV6's picture
Offline
Last seen: 5 months 1 day ago
Joined: 03/24/2016 - 12:19
Posts: 2429
Location: Near to my soldering iron.

Thank you but I made also a shorty from my H03. I know I can use Astrolux tube. My bigger problem that the DS10 has smaller threads at tailcap so I can’t put on the stock to the Astrolux tube. And I want to keep magnetic tailcap.