Unheard
March 8, 2021, 1:30pm
1
Sorry I have to ask, didn’t find it elsewhere: I have a programming clip and Hank Wangs programming kit. Now need to know what to put where. Is there a scheme/picture that shows the signals going to the D4V2 programming pads?
Rayoui
March 8, 2021, 3:00pm
2
The pads on the driver board should be labelled.
You can also find some information in this thread:
Hank (from intl-outdoor.com) has requested my help in writing instructions to flash the D4V2, using the so-called “flash kit”.
The flash kit can be ordered here: intl-outdoor.com/emisar-d4v2-reflashing-kits
My instructions are only for Windows 10, using a command line, which is the only method I have experience with. Windows 7 and 8 should also work with these instructions.
This is a collaborative project, others BLF members can contribute instructions for using other flashing …
Unheard
March 8, 2021, 4:15pm
3
Yes, they are. But not readble. Thanks, I’ll go RTFM
Unheard
March 8, 2021, 5:46pm
4
It’s written on the programmer
Please del…, erm, forget it
.
.