✌ FREEME - LUMINTOP FW3X 2800lm Lume1 Driver AUX RGB LED Flashlight

53 posts / 0 new
Last post

Pages

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650
✌ FREEME - LUMINTOP FW3X 2800lm Lume1 Driver AUX RGB LED Flashlight

 

LUMINTOP FW3X

 3*XP-L HI 2800lm Lume1 Driver AUX LED

  

For reference, this is my order timeline for our Group Buy.

Note: speed of delivery varies from country to country.

©freemex1thedeals.com

 

 

    ©freemex1thedeals.com

 

  

Price: from $59.97

Freeme's Coupon:  ND25F 

 

©freemex1thedeals.com

 

------------------------------------------------------------------------------------------- 

 

Can't wait for our reply??

 

Price:  from $67.95

Coupon: NDNA

 

©freemex1thedeals.com

 

  

©freemex1thedeals.com©freemex1thedeals.com 

©freemex1thedeals.com

 

 

 

Specifications:

  • Emitter: Three LEDs on a copper DTP MCPCB e.g.
    • Cree XP-L HI 3D(NW 5000K)
    • Cree XP-L HI 1A(CW 6500K)
    • Nichia 219C 4000K
  • Optic: Standard TIR optics
  • Lens: Glass with anti-reflective coating
  • Flux: ~2800 lm (XP-L Hi), ~1600 lm (Nichia)
  • Intensity: ~10 000 cd ANSI throw ~200 m (XP-L Hi)
  • Firmware: lume1 - FW3X Constant Current Buck-Boost & FET Driver with Anduril + Osram RGB Aux LED
  • Battery: One flat-top or button-top 18650 cell. An unprotected cell is recommended.
  • Max. length 66 mm. Cell is not included.
  • Driver: FET+7+1 driver. Low parasitic drain while OFF
  • Body: Aluminum with type III HA finished
  • Switch: Electronic tail switch
  • Ingress rating: Equivalent to IPX7
  • Weight: Approximately 60 g without cells
  • Size: 25.5 mm Ø head x 92.5 mm length.

(updated on May 9, 2021 - according to nealsgadgets.com)

 

 

1thedeals youtube channel subscribe

1thedeals.comyoutubeAstroluxNealsgadgetsolight

Edited by: freeme on 06/21/2021 - 01:52
freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

Reserved.

1thedeals.comyoutubeAstroluxNealsgadgetsolight

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

Reserved.

1thedeals.comyoutubeAstroluxNealsgadgetsolight

Agro
Agro's picture
Offline
Last seen: 6 hours 58 min ago
Joined: 05/14/2017 - 11:16
Posts: 6866
Location: Ślōnsk

It’s FW3A with a different driver, right?

1theDeals
Offline
Last seen: 7 months 2 weeks ago
Joined: 03/24/2021 - 05:27
Posts: 2

Lume1 constant current buck-boost & FET with RGB as mention by LT, but yet to see the components being used. 

Agro wrote:
It's FW3A with a different driver, right?
Sunnysunsun
Sunnysunsun's picture
Online
Last seen: 9 min 21 sec ago
Joined: 08/09/2019 - 12:51
Posts: 763
Location: Toronto

Will it have Reverse Polarity Protection? I put the battery in the wrong my on my D4V2 just last week.

mbp
Offline
Last seen: 2 hours 34 min ago
Joined: 04/01/2019 - 11:00
Posts: 391
Location: Baltimore, MD

Interested, but would prefer to have it with a high CRI emitter.

ArtieT59
ArtieT59's picture
Offline
Last seen: 4 hours 17 min ago
Joined: 02/25/2020 - 17:55
Posts: 3158
Location: CT, USA

interested only if sst20 4000k is available depending on price.
EDIT: also interested if Nichia or xpl-hi 7a are available too.

EDIT: i just reread the listing "no need to express interest, just discussion".

I think as long as the "kinks" are worked out of the driver that i've read about on blf (aux lights glitching, reverse polarity protection included, etc) then this could be great.

I would be willing to pay a little more than the Noctigon KR4, which i think would the closest equivalent, because this fw3x will have a superior driver. But what is it worth? the KR4 is US $55. I think in the $60 range. I don't know enough about driver costs to know what it would be worth to have a buck driver of this caliber in a $40 light. I do know that i just bought a couple FireFlies E07x Pro, with 7 LEDS (sst20 4000k of the highest bin = FA4) for $78. And that has aux lights, takes a 21700, comes in multiple colors, and has (i think) a Loneoceans designed buck driver. Not to say that the E07x is anything like a fw3a, just saying there is precedence for a market value here.

So i think it should be under $70 for this light. in my opinion

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

Gunga
Gunga's picture
Offline
Last seen: 22 min 4 sec ago
Joined: 11/28/2014 - 16:56
Posts: 2051
Location: Vancouver, Canada

Interested but needs high cri LED. Any chance for ti?

sleasys14
Offline
Last seen: 1 week 7 hours ago
Joined: 05/11/2018 - 16:23
Posts: 67
Location: charleston wv

Will LUMINTOP be printed on the bezel?

maxchaos92
Offline
Last seen: 7 hours 7 min ago
Joined: 03/17/2021 - 02:10
Posts: 73
Location: Italy

OMG this is what i want, a small edc with aux led that i love,hope the price is good Cash

Maximilian Garage Flashlight Review & DIY https://youtube.com/channel/UC2MCNSaJeOoB6CM1WKc4v1g

firstcipher
Offline
Last seen: 4 hours 48 min ago
Joined: 09/03/2016 - 10:29
Posts: 115
Location: Malaysia

Interested

aggalitsas
Offline
Last seen: 6 hours 50 min ago
Joined: 03/20/2020 - 11:51
Posts: 60

I really need another light with Aux lights, especially in this form factor

greymage
Offline
Last seen: 1 day 5 hours ago
Joined: 02/22/2020 - 18:35
Posts: 31
Location: Austin, TX

As others have mentioned, only interested in a version with high CRI emitters

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

I heard no RPP.

Sunnysunsun wrote:
Will it have Reverse Polarity Protection? I put the battery in the wrong my on my D4V2 just last week.

1thedeals.comyoutubeAstroluxNealsgadgetsolight

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

It should be present for official release version.

sleasys14 wrote:
Will LUMINTOP be printed on the bezel?

1thedeals.comyoutubeAstroluxNealsgadgetsolight

Chinaheart
Chinaheart's picture
Offline
Last seen: 14 hours 23 min ago
Joined: 07/19/2019 - 22:56
Posts: 285
Location: Philippines

This is what we have requested before.....Should also have other emitter options.....

 

RapidLux
RapidLux's picture
Offline
Last seen: 1 month 3 days ago
Joined: 03/24/2017 - 13:21
Posts: 522

FW3A is one of my most used flashlights, and now with Aux led, think I need this if the price is affordable.

MoreLumens
MoreLumens's picture
Offline
Last seen: 7 hours 9 min ago
Joined: 10/25/2019 - 07:08
Posts: 1692
Location: Finland

Are they going to make another batch of those glowing switch caps? Or can you get them from somewhere else than LT?

CM2010
Offline
Last seen: 9 hours 23 min ago
Joined: 07/19/2012 - 05:48
Posts: 669

Interested.

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

With single OSRAM RGB AUX LED in the middle.

1thedeals.comyoutubeAstroluxNealsgadgetsolight

Gunga
Gunga's picture
Offline
Last seen: 22 min 4 sec ago
Joined: 11/28/2014 - 16:56
Posts: 2051
Location: Vancouver, Canada

Oh. Interesting.

Bob_McBob
Offline
Last seen: 11 hours 15 min ago
Joined: 08/14/2016 - 04:53
Posts: 646
Location: Canada

Interested I suppose

Notmyrealname
Offline
Last seen: 56 min 39 sec ago
Joined: 09/19/2020 - 08:53
Posts: 322
Location: Philippines
MoreLumens wrote:
Are they going to make another batch of those glowing switch caps? Or can you get them from somewhere else than LT?

Lumintoplighting has 3 colors in stock.

I feel sorry for people who don't have a hobby or interest to escape to.

Thro
Thro's picture
Offline
Last seen: 17 hours 36 min ago
Joined: 12/16/2017 - 01:55
Posts: 206
Location: Belgium
RapidLux wrote:
FW3A is one of my most used flashlights, and now with Aux led, think I need this if the price is affordable.

I was thinking the same thing Thumbs Up , and if it could come with the new style 2way clip (the old style sucks) and in any other color than boring black…. Cool

Notmyrealname
Offline
Last seen: 56 min 39 sec ago
Joined: 09/19/2020 - 08:53
Posts: 322
Location: Philippines

It will have to be considerably less then $80 for me to buy. Still adding things up and trying to understand where they got that price.

I feel sorry for people who don't have a hobby or interest to escape to.

freeme
freeme's picture
Offline
Last seen: 2 hours 10 min ago
Joined: 11/14/2013 - 22:00
Posts: 10650

Times are bad my friend...frown Factories cannot too afford to have too much unsold products in the inventory. I predict most flashlight manufacturers would scale down their collections or new releases in the coming months. I wouldn't be surprised if manufacturer announce their exit too. Hopefully, situation would improve by this July. 

Thro wrote:
RapidLux wrote:
FW3A is one of my most used flashlights, and now with Aux led, think I need this if the price is affordable.
I was thinking the same thing Thumbs Up , and if it could come with the new style 2way clip (the old style sucks) and in any other color than boring black.... 8^)

1thedeals.comyoutubeAstroluxNealsgadgetsolight

weklund
weklund's picture
Offline
Last seen: 1 hour 26 min ago
Joined: 08/16/2014 - 10:32
Posts: 1050
Location: Orange, Ca.

Yes please … very interested.

... Happy Landings ...

Thro
Thro's picture
Offline
Last seen: 17 hours 36 min ago
Joined: 12/16/2017 - 01:55
Posts: 206
Location: Belgium
freeme wrote:

Times are bad my friend…frown Factories cannot too afford to have too much unsold products in the inventory. I predict most flashlight manufacturers would scale down their collections or new releases in the coming months. I wouldn’t be surprised if manufacturer announce their exit too. Hopefully, situation would improve by this July. 


Thro wrote:
RapidLux wrote:
FW3A is one of my most used flashlights, and now with Aux led, think I need this if the price is affordable.
I was thinking the same thing Thumbs Up , and if it could come with the new style 2way clip (the old style sucks) and in any other color than boring black…. Cool

i can understand that.if no other colors become available and the price is ok i might still get a black one

freeme, could you find out if the flash pads have been corrected to the same positions as the standard pattern . (like noctigone/emisar)

MoreLumens
MoreLumens's picture
Offline
Last seen: 7 hours 9 min ago
Joined: 10/25/2019 - 07:08
Posts: 1692
Location: Finland
Notmyrealname wrote:
MoreLumens wrote:
Are they going to make another batch of those glowing switch caps? Or can you get them from somewhere else than LT?

Lumintoplighting has 3 colors in stock.

Oh yeah. Yellow, fire ball and fire. Didn’t even knew that there is 5 different ones, always thought only those four in picture.

Also they seem to make 50 bucks bunny. Turbo glow bunny that is. Shocked

MoreLumens
MoreLumens's picture
Offline
Last seen: 7 hours 9 min ago
Joined: 10/25/2019 - 07:08
Posts: 1692
Location: Finland
Notmyrealname wrote:
It will have to be considerably less then $80 for me to buy. Still adding things up and trying to understand where they got that price.

Yeah, maybe like $60 would been better? FW3A is something like $40-50 and driver is 20-25? Still it’s assembled and ready to use.
Maybe $80 would suit me if they gave free glow switch cap too.
I sure like glowy stuff, but I really don’t need new flashlight, unless it’s really glowy and reasonable priced, not like that FW3G, but that material is expensive if I remember right? Would also explain why that small bunny costs 50 bucks. Why no group buy? LOL

Pages