SOLD! V10r (Black Aluminium) w 219b 3000k 9080

12 posts / 0 new
Last post
jon_slider
jon_slider's picture
Offline
Last seen: 22 min 30 sec ago
Joined: 09/08/2015 - 12:20
Posts: 5413
Location: Central North America
SOLD! V10r (Black Aluminium) w 219b 3000k 9080

For Sale V10r w 219b 3000k 9080, $125,
Paypal G&S, free shipping in continental USA.

.

.

The light is brand new, old stock, I only opened it to do the LED swap, and to repack control ring grease with Nyogel 767a, for a very firm damping rate, that will not change inadvertently. Requires deliberate pressure to rotate the ring, and then it stays where you put it. The tailswitch is Forward clicky, which allows for Momentary On, at the Preset Rotary Dial position… No strobe.

CRI Ra tested at 96, Tint DUV tested at -0.0051 (Beautifully Rosy).

The stock reflector produces a very tight hotspot (because it is originally for XPG LED). Beam is excellent except when 2” away from a wall, a center cross is visible. This is normal and unavoidable, and exists also with the stock LED, on right:
.
outside of 3” the artifact is gone:
.
I consider the modded beam excellent (Im very picky)

Satisfaction guarantee: If for any reason buyer is not satisfied, I offer full refund upon return, buyer pays return shipping.

Includes free, installed used Titanium Bezel from V10r Ti. Original bezel also provided with the sale, and can be installed at Buyer request.

.

Output ranges from 0.16 minimum to 200 initial lumens maximum on 16340. Can also use, CR123, and if you buy the AA extender (available for $15), then also works on Eneloop (expect max output on AA and CR123 to be lower than LiIon).

This light is essentially identical in function to a V11r. The differences are the body design, and the more focused reflector. (V11r has an XML2 reflector).

Sale includes original box and pocket clip:
.

Edited by: jon_slider on 11/03/2021 - 14:19
mizjif
mizjif's picture
Offline
Last seen: 2 hours 3 min ago
Joined: 09/23/2010 - 03:13
Posts: 1990
Location: Winnipeg, MB, Canada

One of my biggest regrets is selling my old one years ago. Any chance you’d ship to Canada?

jon_slider
jon_slider's picture
Offline
Last seen: 22 min 30 sec ago
Joined: 09/08/2015 - 12:20
Posts: 5413
Location: Central North America

yes if you will pay the shipping…
Im guessing it will add about $10

please PM me your ship address and I will get you a more accurate ship cost, then you can decide if suitable

thanks for your interest, it will make me happy to see it go to a loving home.. its a very nice light

pol77
Offline
Last seen: 2 hours 34 min ago
Joined: 02/21/2019 - 07:54
Posts: 427
Location: London

This is a great flashlight, with a great mod, offered by a great seller.

jon_slider
jon_slider's picture
Offline
Last seen: 22 min 30 sec ago
Joined: 09/08/2015 - 12:20
Posts: 5413
Location: Central North America

pol77 wrote:
This is a great flashlight

thanks for your kind words

It is indeed a very special light, Im very happy with how it turned out. Love the LED, and I really like the Titanium bezel too..

your modding is an inspiration to me. I often think of something you said, when Im soldering..

If its not shiny, its not proper Smile

I make sure my solder joints are shiny, thanks to your coaching.

Kona G
Kona G's picture
Offline
Last seen: 2 hours 15 min ago
Joined: 11/02/2018 - 23:49
Posts: 157
Location: CA Beach

It’s a little warm for my taste, but a very nice light

Check the postal rates to Canada has risen.. 10 bucks (what a deal!) hardly pays your gas money to post office!

gottawearshades
Offline
Last seen: 19 hours 48 min ago
Joined: 09/29/2015 - 15:18
Posts: 81

This hasn’t sold yet?

A little warm for me but still tempting.

mizjif
mizjif's picture
Offline
Last seen: 2 hours 3 min ago
Joined: 09/23/2010 - 03:13
Posts: 1990
Location: Winnipeg, MB, Canada

I’m tempted but we found out recently we have our first baby on the way so I’m trying to be a responsible adult lol

jon_slider
jon_slider's picture
Offline
Last seen: 22 min 30 sec ago
Joined: 09/08/2015 - 12:20
Posts: 5413
Location: Central North America

mizjif wrote:
we have our first baby on the way

Super Happy for You!

Seems to me
all the more reason to celebrate
treat yourself to a unique

High CRI, Warm White stepless rotary with sublumen output.

I think Fate brought us together,
there will never be another opportunity to buy a light like this

Tell your responsible self, that it will be perfect for checking on mom and baby Love

lol

mizjif
mizjif's picture
Offline
Last seen: 2 hours 3 min ago
Joined: 09/23/2010 - 03:13
Posts: 1990
Location: Winnipeg, MB, Canada

jon_slider wrote:
mizjif wrote:
we have our first baby on the way

Super Happy for You!

Seems to me
all the more reason to celebrate
treat yourself to a unique

High CRI, Warm White stepless rotary with sublumen output.

I think Fate brought us together,
there will never be another opportunity to buy a light like this

Tell your responsible self, that it will be perfect for checking on mom and baby Love

lol

Hahahah. If you aren’t a salesman, you should be one. You’d do well! I’m still pondering.

Light-saber
Light-saber's picture
Offline
Last seen: 17 hours 18 min ago
Joined: 06/30/2020 - 19:39
Posts: 45
Location: Middle of Nowhere

PM sent. Yes, Jon is awesome! Thumbs Up Smile

jon_slider
jon_slider's picture
Offline
Last seen: 22 min 30 sec ago
Joined: 09/08/2015 - 12:20
Posts: 5413
Location: Central North America

Light-saber wrote:
PM sent.

thank you,
payment received

the light is Sold Thumbs Up