Suggestions for 17mm programmable driver for Cree XM-L

5 posts / 0 new
Last post
peterloron
peterloron's picture
Offline
Last seen: 2 months 2 weeks ago
Joined: 11/12/2012 - 14:59
Posts: 124
Location: WA, US, Earth
Suggestions for 17mm programmable driver for Cree XM-L

Hello, folks. I have my trusty old A8 BLF edition which has been stuck in one mode for a while now. I’d like to replace the driver with one capable of using firmwares such as Anduril. I’m pretty sure the original driver PCB is 17mm. The NW XML T6 3C in the light is rated up to 3A. Any suggestions for a replacement driver? There are a bewildering variety out there…

One I stumbled across looks like it might work: Astrolux S1/BLF A6 A17DD-L FET+1

Quadrupel
Quadrupel's picture
Offline
Last seen: 12 hours 8 min ago
Joined: 12/03/2017 - 10:40
Posts: 825
Location: Lithuania

Anduril for E-switch only. Led4power , Convoy or MNTelectronics

peterloron
peterloron's picture
Offline
Last seen: 2 months 2 weeks ago
Joined: 11/12/2012 - 14:59
Posts: 124
Location: WA, US, Earth

Ah! Ok. Some things become clear now. Thanks for those links.

jasontheguitarist
Offline
Last seen: 1 day 4 hours ago
Joined: 02/25/2019 - 11:45
Posts: 420
Location: South Carolina

I’d use a convoy driver. One of the newer 12 group firmware ones so you can program the modes you want and decide if you want memory or not.

3A driver

chadvone
chadvone's picture
Offline
Last seen: 5 hours 2 min ago
Joined: 08/28/2015 - 23:48
Posts: 2014
Location: Iowa