Software for nanjg105c

4 posts / 0 new
Last post
devryd
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/04/2020 - 07:11
Posts: 134
Location: Germany
Software for nanjg105c

Hi,
I have a 105c flashlight driver from which I had to borrow the attiny13a for a different project. Now I can replace it, but I didnt save the original firmware. Does anyone have the firmware or C source code for it?
I looked at the sticky post about software, but didnt find anything there.
Thanks for your help.

SammysHP
SammysHP's picture
Online
Last seen: 10 min 9 sec ago
Joined: 06/25/2019 - 14:35
Posts: 1715
Location: Germany

There are many firmwares for that MCU. What do you want?

devryd
Offline
Last seen: 3 months 2 weeks ago
Joined: 02/04/2020 - 07:11
Posts: 134
Location: Germany

I would like to have voltage monitoring )1× 18650) and maybe 3 modes (low mid and high). If you have different recommendations, I am open to suggestions.

nmbusa
nmbusa's picture
Offline
Last seen: 1 week 5 days ago
Joined: 05/05/2016 - 01:30
Posts: 49
Location: Greece

hi

http://bazaar.launchpad.net/~toykeeper/flashlight-firmware/trunk/files/h...

star open closed (soldered)
1 The 1st star is a dummy and not connected anyway.
2 3 modes L/M/H 4 modes, additional moon level
3 ascending mode order (moon/)L/M/H descending mode order H/M/L(/moon)
4 classic memory no memory