[Available again! - BLF special edition light] new Sofirn AAA twisty high CRI 5mm LED

Please add me to the list:

3 * 3200K
3 * 5600K

All black.

Thanks!

If these LEDs are really discontinued, I might want to bump up my order. In Post 1237 I claimed 2 warms and 1 cool.

I’ll step that up to 3 of each CCT. Might make some nice gifts.

Been away for a bit, but this looks awesome. Put me down for 3each of the 5600K and the 3200K all in Black

add me to the list, please?

2x black, 3200K
1x blue, 3200K
1x red, 3200K

On the Yuji store website you can still order both 3200k and 5600K in the 60 degrees version, and the 5600K also in 45 degrees. They may be indeed the last batches because there were more options a year ago.

If the potting of the C01 is indeed so slow to cure (or not at all :weary: ) , then changing the 5600K led to the 45 degrees version may be a popular mod, if someone is willing to buy the 1000 minimum quantity at Yuji for $117 (plus expensive DHL shipping, plus tax and whatever).

Please add me to the list:
1x 3200K black;
1x 5600K black
1x 3200K red;
1x 5600K blue

Please add 1 3200K red and 1 5600k Blue (total 4 lights including previous request).
Thank you

Hi, I am in for:

1* 3200K one black
1* 5600K one black

Thanks!

I hope the potting works as intended and isn’t slow to cure. That was a major sticking point from the start. :frowning:

Says out.

Up my order to 2 of each.

If Sofirn is listing them on Aliexpress, I hope we can get some before they sell out. Or have they allotted BLF a quota?

The interest list is still under 1000, and there will be 2000 made with Yuji leds, so they will not be directly sold out.
And if you do not neccessarily care for high CRI, if this light sells out quickly, no doubt Sofirn will make a low CRI version (with more light and narrower beam) at some point.

1 x 3200K red please

I have just asked to Sofirn if will be possible to buy the (single) driver of the new C01.

I see a lot of interest in this small keychain, Yuji LEDs are very much to blame. Recently I bought some Yuji Leds in Mountain Electronics but they are already sold out.

So any idea what the plans are after the Yuji run?

Djozz, did you do a spectrometer test on these? Sorry if I missed it.

I have the E01vn with the 3200k Yuji and I like the tint on the SST-20 3000k 95CRI much better. So I just want to see how it compares. Wondering if Sofirn can offer a more expensive version with the SST-20.

That would be a different flashlight. The C01 uses 5mm DIP leds and that makes the construction very simple and robust. Using SMD leds requires a construction with lens, optic, ledboard, shelf etc., it may be that Sofirn makes a AAA twisty like that but it will not be a C01 but a new flashlight type.

I probably have posted spectrometer results somewhere in this thread, but I did them again for you.
Here’s a comparison between 3000K SST-20 (spot from Carclo 10507 TIR) and the Yuji 3200K (from C01, in fact an aspheric beam). So because of different optic not 1:1 comparable but it is how both leds are often used in real life. There is not a huge difference apart from that the SST-20 is clearly warmer tinted, I see no tint parameters which are known to displease people, I expect both to be as good as indistinguishable from an incandescent lightsource.
The Yuji leds are always dim of course, that can have an influence on the experience too.

C01 with Yuji 3200K 95 CRI led:

E2L with 10507 optic and SST-20-W 3000K 95CRI leds:

how is the list ever gonna be made and be accurate from 49 pages ? it will take hours to get everyone logged and taken care of wont it? seems like its gonna be a huge task . :frowning: