** BLF LT1M-Mini Project - The little Lantern! ( PM's sent today June 21, 2022)**

[roostre]

@tactical_grizzly

@SIGShooter

@lionheart_2281

and it seems charging terminates at 4.3v…as per the triple click flashes

You should check with a DMM. This is the first time I’ve heard of that high a termination voltage with a mini-LT. The internal check reads a little high straight from the factory I believe.

This was my experience as well. Mine read a little bit high out of the box.

An Easy Method for Setting the Anduril 2 "Voltage Correction Factor" from:
https://budgetlightforum.com/t/-/69798

1) There will be two (adjacent) "Voltage Correction Factor" settings that allow the "Battery Check" function to blink out "3.7" for a "Battery charged to 3.73 V".

2) Choose the one that can be selected with the least amount of clicks.

Note:

The above method adjusts the "Battery Check" function to blink out 3.7 when the battery voltage range is between 3.70 V and 3.80 V (or as close to that as is possible from adjustment).

Use a different battery voltage than 3.73 V if you want a lower or higher voltage range.

You can also use a battery at a different voltage than 3.73 V for adjustment. For instance, choose the "Voltage Correction Factor" selected with the least amount of clicks that allows the "Battery Check" function to blink out "4.1" for a "Battery charged to 4.13 V".