LED parameter
FLUX M2
BIN HB1
RA 95
I mean the available CCTs, is it 2700, 3000, 3500, 4000K like usual with luminus 95CRI ?
not sure, it’s just a sample.
i think 3000k 4000k 5000k will be available.
but i dont know if it’s R9080 ,or R9050, or R70
Very promising. Could you ask Luminus about if they will make 5000K Ra90 or even Ra80?
Edit. Are that emitter made under request for you?
Ok, thanks for the reply.
5000K would be great too.
Those duv numbers seem like it will be pretty yellow. Green AR glass could help though. Very interesting. I certainly wasn’t expecting that.
That is very exciting, I will be happy to buy 10 or 20 loose LEDs if they will be available in 4000 and 5000k.
high cri sft40 is a dream come true, Thank you Simon!!!
Can we order it from you?
Here I was just hoping that Luminus would finally sell the 5700K and 5000K Ra65 versions, but I’d gladly take a 4000K or 5000K Ra95 instead.
High CRI warm SFT-40? Hell yeah! Finally some good 5050 choices.
Finally we will get a really good warm throw.
Indeed, looking forward to these!
Here’s a short review of the S21E XHP50.3 HI R9050:
If it weren’t for the lackluster UI it’d be great. As it stands I’d rather build an XHP50.3 light with a mechanical switch driver with the 12 group firmware.
Or, better than that, asap with Andúril 2.
+1 to that, plus easily accessible flashing pads and replace the AT85 MCU with the AT1616, in that order of importance
Seriously, doing all three above would move Convoy right up there with the big hitters like Wurkkos, Sofirn, etc and actually surpass Hank (which is still using the AT1634 which is better than the AT85 but still clings to old obsolete flashing method and pad layout).
Well yeah if he’d make a boost driver for e-switch lights with anduril that’d be preferable. But I mean with what options currently actually exist I’d take the clicky switch boost driver over the e-switch one.
Simon actually has just released the S3 with the boost driver and XHP50.3 HI on the store a few days ago.
Yeah I saw that… I might get one. I also have an S8 host laying around, I might buy the boost driver and an XHP50.3 to put in it.