(Email is coming with tracking )Discussion Thread.-- 1st BLF Titanium flashlight with tritium.

[ReyLight]

@Gunga

Btw. Any extra triple pills to sell? Is it loose inside the convoy?

It works fine in convoy. I'd like to make another extra batch if it reaches 50pcs.

Price is 5$,without tracking, or shipped with Ti host sharing the tracking.

[ReyLight]

@djozz

Just holes in the brass ring will work to screw the pill in, but not when screwing the pill out again, it will just loosen the driver. But never mind, I will do the holes myself, or make a groove in the underside of the pill with a hacksaw.

When screwing out the pill, press the driver, then tweezers the retainer.

[Gunga]

@WWEFANS

@Gunga

Cut slots into the threads of the pill. This works much better

Did you mean this cut? Not doable on softer copper. too much cutting burr.

I have 2 sinner lights with copper pills. They are slotted like that.

[pilotdog68]

I’m guessing he doesn’t mean that it physically can’t be done, but that his machinist doesn’t want to/can’t do it.

[ChibiM]

we could always do it by hand!

[MG1 (MG)]

@WWEFANS

@Gunga

Btw. Any extra triple pills to sell? Is it loose inside the convoy?

It works fine in convoy. I’d like to make another extra batch if it reaches 50pcs.

Price is 5$,without tracking, or shipped with Ti host sharing the tracking.

I’m in for several extra pills. The price is fine. Slots are a non-issue for me.

[Gunga]

Id like a couple extra pills for convoys please.

[Gunga]

Btw. Great job on this build. I’m impressed at how it’s going.

Also. I don’t mind cleaning up cutting burrs myself if that is the issue. I don’t have a saw available but do have files!

[vinte77]

Rey are you taking orders for extra pills for $5 each? Or are you going to wait and see if there is interest for 50 orders, and then start taking orders?

[ReyLight]

@vinte77

Rey are you taking orders for extra pills for $5 each? Or are you going to wait and see if there is interest for 50 orders, and then start taking orders?

Good question. I'm kinda waiting. But I think it's not hard to reach 50 orders, I don't want to trouble you with another interesting list thread.

[greg]

I’m also in for two extra pills. Shipping with Ti host.
Thanks.

[vinte77]

I’m in for 2 extra pills if you need a count.

[Gunga]

Any more updates?

[Gunga]

So we’re past shipping date. Any updates?

[MG1 (MG)]

Rey is probably real busy right now packing up the lights and getting them to the post office. Do you think?

[Ronin42]

So Ray,

How are we looking for extra copper pills and thoes 3x drivers?

[ReyLight]

Hi all,

Really sorry for late response.Been busy with the office and house moving.

All tubes are done.

Pill (for triple) is 5$/pc. shipped with Ti Host,sharing the tracking.

only one pill, shipped W/O tracking.

two pills, W/ tracking.

BTY, new driver is almost done now. I remembered I posted it somewhere, here again.

1..17mm dia

2..4.5A output 2.8-4.35V

3..0.1-2-30-100%, starts at 0.1%. No memory.

4..Constant Current controlled.

5..Reverse polarity protection.

6..Low voltage protection.

7..when 100%,temperature gets 70℃, output drops to half.

8..+ - printed.

9..with a jumper to change it to off-time memory.

[ReyLight]

BTY, we made 2 kinds of clips.

one is like the picture in OP. 5pcs "Pizza slice ", one of the slices will be aligned with the corm knurling.

Other is 5pcs drilled holes, like the head.

[Gunga]

Wow!!! pix please!!

[Gunga]

Paypal sent for pills! Can’t wait.