Sorry for the misunderstanding, it is as of just a little bit ago off-time and yes I love how it is.
Heheh, that makes a lot more sense to me. After trying on-time w/ memory disabled I was flabbergasted that you could find that appealing. Very difficult to use w/ no upside I could find!
I’ve got the preflash issue figured out however there’s no way I can fix it on this light with a tiny10. I was getting the same preflash on my TC300 (w/MT-G2 and BLF20DD) so I put a 10kohm resistor on R4 and it totally solved it!
I’m going to try to file the “wings” fenix uses into a 17DD and make it fit direct so I can have a pull down resistor (unless switching to a BLF10DD V1.2 fixes it once they come in)
Is R4 the gate pull-down resistor? Looks like it to me at a glance. If so, it seems to me that you have space to do that on the tiny10. On the FET side of the board you just put the resistor between the GND ring and pin 1. Maybe right around where the board is marked U2.