FW3A mod thread. Post yours!

[jon_slider]

@xevious

Does CRX have a topic where he gets into the details of what product he uses and the substrate?

CRX about glow types (and he sells glow gaskets for triples):

DIY Glow Gaskets for Triples and Other Glow Stuff

A wee tutorial on how to make your own glow gaskets for multi emitter lights BLF style.[image] Making glow gaskets using magnets, glow powder & UV glue: First I made a template from an old 20mm triple MCPCB to match up with a Carclo 105xx optic. 65mm steel box lid. This is the most difficult & time consuming part but only needs done once.[image] A piece of sticky tape placed on the steel surface sticky side up. (Clear tape is best to allow UV hardening of both sides) 6mm x 2mm and 3mm x 2mm…

@CRX

CRX about fw3a mods:

CRX FW3A Mods & Teardown

Received my FW3A today Stock FW3A.[image]Cree XP-L HI 3D version. Initial tests were something like this with a 30Q: Default turn on - 135lm Top Ramp - 972lm/ 30s - 730lm Turbo max - 3100lm Very nice light, well worth the wait, well done team ;) :THUMBS-UP: On to the moddin'...[image]Triple Cree XP-L HI 3D emitters Noctigon copper DTP MCPCB Carclo 10511 optic ARC glass Green GITD glow gasket Anduril firmware 8x7135 & FET driver Upgraded 20AWG silicone wires Electronic tail swit…

@CRX