FWAA Anduril 2 .hex

[TMaxxJJ]

Both of these pretty much explain the process:

FW3A Firmware Flashing Guide

Hi everyone, I'm new to BLF, but have been a lurker over at CPF for many years. I recently signed up here after purchasing an FW3A, and then subsequently a D4V2 too - needless to say I've rediscovered the flashlight bug! Whilst my FW3A was in transit, I noticed posts about the muggle mode bug in the FW3A firmware and set about finding out how the firmware is flashed on the FW3A. I couldn't find one single source of information, so I decided to pull together a post in a similar fashion to…

Guide: how to flash ATtiny13a based drivers (NANJG, QLITE, etc.) with custom firmware

This is a short “quickstart” guide on how to flash drivers that use the ATtiny13a MCU such as Qlite, AK-47, 105a/c/d, etc. Flashing drivers that have an ATtiny25/45/85 is similar but the “fuses” and firmware will be specific to the MCU being used. References and relevant links: http://flashlightwiki.com/AVR_Drivers USBASP V2.0 user guide ATtiny13a datasheet Flashlight Firmware Repository by ToyKeeper Attiny25/45/85 FW Development Thread BLF A6 FET+7135 Light Troubleshooting and Mod thread …