[GB ended,discussion only] CRI > 80+ NICHIA 2000K-6500K [E21A/219B/219C/319A/144A/757GT-F1(Optisolis)]

[clemence]

@optosolis

I have an AT WIZARD PRO 6500k E21A from Clemence. Great Light!.

I am considering swapping for a more 5600k Daylight white.
would I be right in saying it would mean a LED mix of say maybe 6500k 5000k?.

possible ?.
worth it?.

kind thanks.

Better get another Wizard and put 5700K quadtrix E21A in it. Everytime you open the press fit bezel it will damage the bore.

[Clemence]

[clemence]

To those placing order approximately last week, please be patient. Last week I broke my pinky toe. It was hard for me to moving around since I had to keep it slightly level with my heart all the time. Otherwise it will bleed and creates pain. I’m much better now and should be able to work normally in one or two days.

[Clemence]

[ma_tumba]

Take good care of yourself, Clemence

[djozz]

Pinky toe comes first, then your customers, sounds a healthy attitude . Get well soon!

[clemence]

Check these new boards test result:

New VirEnce MCPCB for E17/E21/119/144/233U

Thanks Johnkey, I borrow your pic here… [image] The copper board works unexpectedly way better than predicted. From many tests performed in BLF, we knew the tighter the LED pitch the hotter it gets. Not only because the copper trace surface area needed to shed the heat from the LED base reduced, but also due to the “photon cross talk” as mentioned by Nichia in their application notes. The LED takes and recycle the photon from the neighboring LEDs and the stored photon, instead escaping as ligh…

[Clemence]

[clemence]

@djozz

Pinky toe comes first, then your customers, sounds a healthy attitude :+1: . Get well soon!

Thanks Djozz =)

[clemence]

10pcs E17A sample ready to pack for Finland

[Clemence]

[contactcr]

Look at these super long leads. Jeez. Making maukka’s job too easy IMO

[Wieselflinkpro]

Does anyone need NVSL219B-V1 SW45K [4500K ANSI BBL] 9080 ?
I have 10 of them laying around in germany.