Pulsar
(Pulsar)
July 2, 2013, 9:22pm
21
its not an original idea by me, i just really like the idea
oRAirwolf
(oRAirwolf)
July 2, 2013, 11:39pm
22
Honestly, I wouldn’t get either of those.
I would go with an ODROID-U2 or ODROID-U. They are $89 and $69 respectively. They are much more powerful than the Raspberry pi and the Beagleboard, albeit a little more pricey. But you get a quad core Samsung Exynos processor, 2 or 1 gigs of ram, and a Mali-400 quad core GPU. It is basically the same processor that comes in the Galaxy S3 or Galaxy Note II phone. These run XBMC with 1080P very nicely.
ODROID-U2 - http://www.hardkernel.com/renewal_2011/products/prdt_info.php?g_code=G135341370451
ODROID-U - http://www.hardkernel.com/renewal_2011/products/prdt_info.php?g_code=G135341359084
ODROID-U2 Specs:
Processor Samsung Exynos4412 Prime Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache
Memory 2048MB(2GB) LP-DDR2 880Mega data rate
3D Accelerator Mali-400 Quad Core 440MHz
Video supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Out micro HDMI connector
Audio Standard 3.5mm headphone jack
HDMI Digital
LAN 10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
USB2.0 Host High speed standard A type connector x 2 ports
USB2.0 Device ADB/Mass storage(Micro USB)
Display HDMI monitor
Storage (Option) MicroSD Card Slot
eMMC module socket
Power (Option) 5V 2A Power
System Software u-boot 2010.12, Kernel 3.0.x, Android 4.x
Source code will be uploaded on download page after first shipment.
Case Aluminum full metal body with heat sink. (59 x 57 x 60 mm)
PCB Size 48 x 52 mm
ODROID-U Specs:
Processor Samsung Exynos4412 Prime Cortex-A9 Quad Core 1.4Ghz with 1MB L2 cache
Memory 1024MB(1GB) LP-DDR2 800Mega data rate
3D Accelerator Mali-400 Quad Core 400MHz
Video supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Out micro HDMI connector
Audio Standard 3.5mm headphone jack
HDMI Digital
LAN 10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
USB2.0 Host High speed standard A type connector x 2 ports
USB2.0 Device ADB/Mass storage(Micro USB)
Display HDMI monitor
Storage (Option) MicroSD Card Slot
eMMC module socket
Power (Option) 5V 2A Power
System Software u-boot 2010.12, Kernel 3.0.x, Android 4.x
Source code will be uploaded on download page after first shipment.
Case Aluminum full metal body with heat sink. (59 x 57 x 60 mm)
PCB Size 48 x 52 mm
garrybunk
(garrybunk)
July 3, 2013, 3:09pm
23
driveX:
Sorry for the late reply. I think that both should be fine, they are very similar. Bluetooth is nice for pairing with phone/mouse/headphones/PS3 controller… I have damaged BT on my imito and I don’t miss it much. You can check for custom ROMs on http://blog.geekbuying.com or http://www.freaktab.com . From what I have found, MK809II should be compatible with ROMs made for imito(which is quite supported).You don’t really need the custom rom though. PS: What are you going to use as an input device?
You're asking me I suppose. I figured a USB Keyboard & mouse, unless there is a better option.
-Garry