Is a solder pad lifting issue located at my side or a user error

[Lexel]

And its not that I have never mentioned how to solder pads on drivers

Soldering iron tips, how to solder SMD without ruining the PCB

I want to get here tips from experienced people, also some how to do videos and other guide tips You can solder all day on the boards without stripping pads if you solder with 280-295 degree Celsius and leaded solder, what kills pads is too much heat, unregulated irons get easily to 400°C and more, they destroy the glue between PCB and copper . generally soldering SMD with unregulated iron is a really bad idea, you have to be very fast so the pad does not overheat better invest like 45$ for…

Pad soldering

Hardware

- 295°C Weller WSD81

• Felder 0.5mm Sn62Pb36Ag2 with 3.5% flux (one with relative much rosin core flux, general use not SMD which has less flux %)

Preparations

- clean PCB with Alcohol and cotton swab

- twisting the wires end (helps to prevent splicing while soldering)

• cleaning tip in sponge

1.

- pre tinning pad and wire

• heating up pad and stick the wire end into it

• same as 1. just adding extra flux (for example if you use a SMD solder wire with only 1% flux)

• directly solder wire to the pad (not recommended but works fine with a solder wire with 2.5% or more flux)

in the video I look without any magnification to the soldering, just the camera records

https://youtu.be/nXyRq1EaIzE

I get way too often asked things that are well described in the sales topic,
like what to solder where and so on

That S42 user also complained I do not deliver a manual for each driver