Lexels Crowdfunding site on GoFundMe (similar to Patreon), still making a loss on driver sales with 10$ per hour labor

[Lexel]

Open campaigns

Drivers

Emisar D1(S) white flat driver

100€ goal

FT03 CC FET driver for white flat

50€ goal

Acebeam X45 Buck
100€ goal

1S BLF Boost
200€ goal

.

Tail boards

20/30A electronic tail clicky boards
75€ goal

lights tail boards with low battery warning and LVP

[SALE] lighted tail boards, rainbow or custom color combination

I am finally starting sales on my lighted tail boards how it began can be read here each generation adds more features Generation 1 simple 2x3 LED with balance resistors optional trimmer each LED has its own balance resistor so different LEDs can be combined 2 channels can be dimmed with optional trimmer it is advised to use LEDs with similar forward voltage (CW, WW, blue, ice blue, pink or red, orange, yellow) if different colors used the LEDs with higher forward voltage dim out with l…

100€ goal

Gen 2, 2.1, 3 and 3.1 lighted boards

.

Misc:

Programming key

BLF driver programming key v3.2 launched on Oshpark

You can see the archived poll results on the Wayback Machine: https://web.archive.org/web/20221220093741/https://budgetlightforum.com/t/-/72815

60€ goal

.

Test Equipmend/production hardware

campaigns that reached its goal
Reflow oven

[MOD] Puhui T-962A Infrared reflow oven

After using a hotplate in addition to a hot air gun for quite some time I wanted to upgrade to more professional gear Problem is real professional small reflow ovens cost 2,000€ and up Chinesse start at about 170€ but come with a lot of issues I have chosen the T962 Series Model A that is a bit bigger than the 962 for 280€ shipped in EU I bought this in EU because I doint want to have trouble with customs because its basically nowhere near having the requirements for a CE label Even if its …