Cajampa wrote
Ok thanks, that is not bad. So if i would charge at 500mA it would terminate at 50mA, but i would like it to be 5% even if it would take much longer to charge because of stabler & higher resting voltage, too bad you can’t chose how much you want the termination current to be.
On the Xtar VP2,when charging an 18650 or 26650 at 1 amp and it hits 4.19 or 4.20 volts,but still charging , I sometimes tap the button a couple of times to drop the charge current to 250mA.It restarts the CC/CV charging cycle,but terminates at 50mA instead of 100mA.HKJ’s review .I assume all quality chargers with multiple current settings will do something similar