Olight SR90 Intimidator emitter swap

[Enderman]

@Sirius9

I recently moded one.
You won’t have much of use for stock driver because stock LED SST-90 is ~3.2V led but requires huge current, not sure but I think about 8A or so and you won’t find worthy replacement LED, you can have much better performances from XHP leds that are 6V so you will need new driver.

There are LEDs that will work great at 8 amps like the XP-L if they have enough cooling

XP-L2 V5 Output & Death test by Texas_Ace Over 2200 lumens! Still worked after 15 Amps!

Ok, this is the first official release of an LED test from my setup. I have a few others already complete that I will be releasing as I get the time to make the charts all pretty and ready for upload. Cliff notes version - My sphere and setup is finally calibrated to a level that I feel good about releasing numbers from - I figured out how to turn a PVC sphere into a true integrating sphere that reads the lumen value directly on the lux meter so no math is involved - The lumen readings line …