Recommendations on a starting point for a motorcycle fog light.

[rockscreation16]

I PM’d PilotPTK. Looking forward to seeing what he’s got.

You are right, there aren’t any specs and it’s probably 4-cells in parallel. My bad. You can always wire in a voltage regulator to provide the correct voltage. Should be cheaper and easier to get/make the proper driver to wire into the system. A 12-volt 9A driver like KD sells wired into the system should work. You might have to rewire the LEDs in series but that should be easy if you solder.
Another option is a DRY reflector for under $9, the DRY driver for $5 and the XM-L emitters. The DRY driver runs on 12V. All you’d need are the housings.

I think I’d go with ChiX’s suggestion for PilotPTK’s setups. All in one solution except for the housings.

Where can I find the DRY reflector and driver?

Does anyone know if it’s possible to find an empty housing like this