Hi fdr, what battery were you using?
I am using a 900 mAh trustfire.
The o-rings seemed fine on mine. I read somewhere else someone complaining about the o-rings getting chewed up, but I cant see how that’s possible unless they tried to remove (unscrew) the clip retaining ring without taking the o-ring off first. Or maybe just some people got a bad batch of o-rings?
I mean it seems as if maybe they have been trying to unscrew the retaining ring over top of the o-ring instead of taking the o-ring off first then unscrewing it.
Just a theory cos it doesn’t even grab the tiniest bit on mine, but its odd that I read about the o-rings twice in 1 day from different places.
Would you guys say that the Archer throws better than Balder SE-1 with R3 or Xtar WK26 with R3?
I got an old and a new Balder, old one was OP reflector, new one is SMO and throws great.
I got the ThruNite Archer 1A by bit @german eBay-sites for 40$ (32€).
waitin for the flashlight from China, I hope gettin it soon. I have eneloop lsd here and will try the output first with them, but lookin forward to the brighter output with 14500.
My question, will it be ~ two times as high compared to a single eneloop 1900mah lsd cell then - may be 300 lumens?
so I found this combination of charger & 14500 cells on FastTech:
Nitecore NL147 14500 750mAh 3.7V Rechargeable Lithium Battery
SC-S7 1*NiMH/Li-Ion, US Soshine SC-S7 LCD Universal Ni-MH/Lithium Smart USB/AC Battery Charger / Flat to Round Power Plug Converter
everything (2 cells, charger + US-EU converter) just for 27,5$
did anybody ever try this combi or should I ask, are there better cells & chargers (besides Pila, which may be to expensive) out there?
may be this newer one would be better choice I think, but not yet available Soshine SC-L2
and whats about these 14500 cells from thrunite-store? : 4x Soshine Li-ion 3.7V 14500 800mAh Protected Rechargeable Battery
& more important: which 14500 cells will certainly fit instead of eneloop in the Archer 1A, are there any known problems?
by the way: big Thanks to kreisler for this excellent review on the Archer 1A —Danke— 
Nice analysis Kreisl, but with the Archer (and Saber) lights, I’d guess there was not too much development cost - these are essentially just Neutron (and T10) lights with new emitters. If your numbers are right, I agree, hardly worth the effort, but it hasn’t really cost them much.
Gotcha…… thanks for the sanity check 
got my archer-1a from china!
very impressive small flash light, eneloop works very well, really throws about 50-60 meters.
a tint is in full, pure snow-white, nothing blue, green or purple.
now i’am lookin’ for 14500 + charger from FastTech and like to order the O-rings as well.
the original ones are suddenly damaged as we know, so these are the right O-rings, Kreisler?
Water-tight O-Ring Seals (5-Pack)
which charger + 14500 do you recommend?
o.k., so that’s really a faulty construction on archer.
i’ll try to get 15.0 x 17.5 x 1.25 in a hungarian “water installation shop”.
if those don’t fit too, i’ll be careful and don’t put the archer into water…… J)
why your neighbour doesn’t use the archer?
I live in the city, in a country with no power outages for the last 20 years, my camping days are as good as over, I do not need flashlights either but I don't care: I invent as many uses of them as possible while waiting for the zombie apocalypse :ghost:
Need? Need? What’s need got to do with anything?
Hi Kreisler!
where has gone your review?
can’t find it no more…. 
I love it when a new term gets coined.
Uh? What is this thread without a title? 
check the op, a typical BLF "20$" review with 3hrs invested time&efforts :P
guys feel free to compare and then estimate the monetary value of my immense 70hrs investment, the
Review: Foursevens Preon PenLight Olight O'Pen (2xAAA, XP-G2)
Why no keychain duty anymore?
I can say for myself that Tank007 E09 is a piece of crap as is this one most likely.
Everything is probably glued and hard to modify. Uses a poor driver with an old XP-E emitter. Not even neutral tint and not even XP-E2 or XP-G2.
I’m modding my E09 with XM-L2 T6 3C, coz fuck it, new wider TIR lens already destroyed/dedomed XP-G2 and XP-E. Grind grind and boom XM-L2 fits perfectly to the old reflector 
Chunk of copper underneath, driver modified to maximum output. Should be no problem now in case of using lions to not blow up the emitter but with XP-E it could happen lol. Not much boost on NiMh but in the upper voltage ranges it does boost a bit J)
Anybody thinking of modifying any glued Tank007 light, forget it and get yourself a different light, not worth the money and time for modding. The whole driver is glue sealed inside you will have to drill and so on it out. If you even get the head opened since that is glued very very well.
Kreisler always forgets this, Tank007 = glue = avoid them if you want to mod.
They had quite a few in stock, now only 2pcs left.
I'm thinking that Wallbuys probably has more than two in stock, but there are only two available for 48% off.