Suggestions on similar size EDC with same power as the E1320 modded UF2100?

LED Flashlights – General Info 18650 Flashlights
1

Showed my friend the modded E1320 I recently received.
Since I know Erik is not keen on doing anymore of those , what options are there out there with the same/similar power without any need for modification.
If there are any I assume they cost much more……

2

The new Fenix PD32 advertised with an XML would be close, I could be persuaded to sell my E1320 uf2100 for $30 :wink: :wink:

3

I don’t know much/anything about the UF2100, let alone the modded version. What are it’s vital specs?

4

Ha ha……
38 USD Shipped?
Switch ok?

5

Switch is good, I just barely use it so if you have a good home for it, I’ll sell it to you

Pm me if you want it Joe

6

If you wanted a project, this host

http://www.intl-outdoor.com/edc-18650-flashlight-host-p-535.html

This driver

http://www.intl-outdoor.com/amc71358-5mode-circuit-board-nanjg-105c-p-216.html

And this emitter

http://www.intl-outdoor.com/cree-xml-u3-1c-led-16mm-mcpcb-p-593.html

Would pur you in the ball park of e’s 2100, it will get hot on high though. Mine does at 2.6a.

Or the completed light

http://www.intl-outdoor.com/edc-18650-xpg2-r5-xml-u2-850450lm-flashlight-p-522.html

As I say, I have built one as my edc and I love it.

7

Have a look at the $20 Ultrafire C303:

and

I have one, the E1320 custom UF2100 driver fits it with a little foil wrapping,
but it’s a great EDC stock.

8

I have made this same light with those parts. It really gives tons of light for such a small host. Really liking that one. I carry that always in pocket and it’s very good when you need lot of light in short period of time.

9

Roche F12 ($27) and EDC 18650 ($28)

Both of these run at 2.45A which doesn't quite match the E2100's 2.8-3.5A, but honestly the beam on all these lights are so floody that it is hard to notice much of a difference. Both of the above can also be ordered in neutral which is nice.