thefreeman’s HDR Anduril 2 high efficiency drivers - update : FWxA boost driver

I installed it in the D4v2 :

I cut a few traces and added a bridge to wire the MCPCB in 6V, I used sliced 2700K and 5000K (or 5700, not sure) LH351Ds :

I used thinner wires for the aux LEDs, I don’t know how they manage to fit such big wires originally.

They’re only for 110°C max though, probably OK but not for too much soldering, I think I’ll try to use enamelled wire like TTerev3 is using next time.