TK's Emisar D4 review

[TrueRMS]

Does anyone know the measurements kf the D4 lens? I see MtnE sells them and I think it’s the size I need for another light but just wanted to check.

[saypat]

Wow! Interested in this version of the D4 with aux LEDs.

[Omega_17]

So the rumor was true about a sand version. The new version looks amazing!

[iamlucky13]

@djozz

It does not look like fake, the changes that you see make too much sense: nice knurling on the 18650 tube and the 18500 tube, finally a cool SS bezel, aux leds, and most important: a promising-looking recessed switch.

I don’t think any of the existing pictures from Hank show quite the same angle on that rock, so I also suspect it is real.

Both aluminum and stainless bezels are shown. I like the idea of providing an option.

Also, an optional magnetic tail cap is mentioned, and a lanyard attachment point is visible.

Personally, I like the feel of the smooth tube on the existing D4. It’s easy to hold onto, yet slides into my pocket easily. Not a big deal, however.

[saypat]

I would like to purchase a D4 with aux LEDs, and a D4S …… and then my collection will be complete, no more buying! And also that custom lantern GB, and ……

[nick779]

Well that explains why even MTN has their D4s on “sale” and just about everyone is out of stock.

Figures I finally jumped into 2 D4s with Anduril right before this happens….

Stainless bezel is definitely nice for the EDC durability crowd, and the new Aux board looks great. That also explains the somewhat recent host changes with the slightly larger hole in the MCPCB shelf.

[Firelight2]

I hope the new improved D4 model hits the market soon. It looks like Emisar really listened to the feedback and have addressed pretty much all concerns:

• Complaints about lack of knurling - fixed on new model.
• Complaints about aluminum bezel being too fragile and breaking when dropped - fixed on new model with optional SS bezel.
• Complaints about lack of Bezel aux leds - fixed on new model.
• Complaints about protruding switch button - hard to tell from the pictures but it looks like the switch is recessed on updated model.
• UI - based on that last run of D4s I expect Anduril UI to be optional.

[VrestoTaylor]

well…no usb,no order…but its still a nice flashlight:))

[Flying_Luminosity]

@lightdecay

It’s easy to find, not sure if I should be posting the link here, but here you go.

https://www.ebay.com/itm/113786665262

EDIT:
Photos look very similar to others Hank uses for D4/D4S. It might not be fake, more likely someone decided to leak it before Hank officially announced it.

The link no longer points to the D4S Gen 2, but to the JETbeam Emergency II PRO TI.

[BabyDoc]

@Firelight2

I hope the new improved D4 model hits the market soon. It looks like Emisar really listened to the feedback and have addressed pretty much all concerns:

• Complaints about lack of knurling - fixed on new model.
• Complaints about aluminum bezel being too fragile and breaking when dropped - fixed on new model with optional SS bezel.
• Complaints about lack of Bezel aux leds - fixed on new model.
• Complaints about protruding switch button - hard to tell from the pictures but it looks like the switch is recessed on updated model.
• UI - based on that last run of D4s I expect Anduril UI to be optional.

But it appears from the pictures, Emisar has ignored the complaints regarding its unilluminated side switch. IMO, that is a big oversight.

[hank]

and then my collection will be complete, no more buying!

Just mod everything every six months to try to keep up at BudgetUserInterface.com

[saypat]

@Flying Luminosity

@lightdecay

It’s easy to find, not sure if I should be posting the link here, but here you go.

https://www.ebay.com/itm/113786665262

EDIT:
Photos look very similar to others Hank uses for D4/D4S. It might not be fake, more likely someone decided to leak it before Hank officially announced it.

The link no longer points to the D4S Gen 2, but to the JETbeam Emergency II PRO TI.

•
•

just click on the old photo to read about it and see pictures……

[nick779]

@Flying Luminosity

@lightdecay

It’s easy to find, not sure if I should be posting the link here, but here you go.

https://www.ebay.com/itm/113786665262

EDIT:
Photos look very similar to others Hank uses for D4/D4S. It might not be fake, more likely someone decided to leak it before Hank officially announced it.

The link no longer points to the D4S Gen 2, but to the JETbeam Emergency II PRO TI.

Gotta click view old listing at the top…
https://www.ebay.com/itm/EMISAR-D4-V2-VERSION-2-NEW-2019-MODEL-HIGH-POWER-EDC-CREE-XPL-HI-4000-LUMENS-/113786665262?_trksid=p2047675.m43663.l10137&nordt=true&rt=nc&orig_cvip=true

@vresto

well…no usb,no order…but its still a nice flashlight:))

Eh, USB charging is overrated and takes up space.

@BabyDoc

@Firelight2

I hope the new improved D4 model hits the market soon. It looks like Emisar really listened to the feedback and have addressed pretty much all concerns:

• Complaints about lack of knurling - fixed on new model.
• Complaints about aluminum bezel being too fragile and breaking when dropped - fixed on new model with optional SS bezel.
• Complaints about lack of Bezel aux leds - fixed on new model.
• Complaints about protruding switch button - hard to tell from the pictures but it looks like the switch is recessed on updated model.
• UI - based on that last run of D4s I expect Anduril UI to be optional.

But it appears from the pictures, Emisar has ignored the complaints regarding its unilluminated side switch. IMO, that is a big oversight.

The D4 was around before anything with Aux LEDs even existed so I wouldnt call that a complaint, just a suggestion/improvement. As for an illuminated side switch, due to size/pin outputs/durability/cost it may have not been doable. Hardly an oversight. People are always going to complain about something no matter what is improved. They could implement all these changes including the switch LED then its now a $50 light. Now people whine that its too expensive.

TBH though, id take a illuminated switch over aux LEDs any day, especially on a side switch light.

If they offer a Copper D4 V2, I may buy a 3rd/ my first copper light. I feel like copper with an SS bezel would be sharp looking. Unless they offer Smooth green again then ill need two…

[lightdecay]

D4V2 is real. $45

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

[sbslider]

Red, yellow, green, cyan, blue,magenta, rainbow aux LED options is selectable through config UI, as well as the voltage indication function. (6 fast clicks and hold the 7th to choose the aux LED options, 7 fast clicks to choose the aux LED modes)

I was wondering how that would be user configurable, guess I’m still wondering how they get all those colors for aux LEDs in there. . . .

super tempted

[qjarq]

Hello, where can I find the latest compilation of Anduril for D4?

There the last one is from 02-06-2019:
http://toykeeper.net/torches/fsm/

[Rexlion]

@lightdecay

D4V2 is real. $45

https://intl-outdoor.com/emisar-d4v2-high-power-led-flashlight-p-940.html

A flashaholic and his money will soon be parted. And don’t expect me to pound the sand-colored light. :person_facepalming:

[ToyKeeper]

@hank

Just mod everything every six months to try to keep up at BudgetUserInterface.com

I mean, you’re not wrong.

Also, since the D4V2 is announced now, I put up a review to answer people’s questions…

TK's Emisar D4V2 review

Emisar D4 (V2) This is the updated 2019 version of the Emisar D4, produced by Hank Wang of Intl-Outdoor. [image] Disclaimer: I helped make this. I’m not an impartial reviewer. This thread is primarily intended to answer everyone’s questions about this brand new product. I reviewed the original Emisar D4 too, if you’d like more pictures, information, and background context about this light. What’s New? If you’re already familiar with the original D4 and just want to know what changed, h…

I kinda put it together in a hurry; wasn’t planning on doing it quite so soon, but the leak seems to have advanced the schedule a bit.

[Tally-ho]

Is the D4v1 only sold out but will be restocked or will it be discontinued ?
I’m fine with mine like it is, a lighted switch would have been a plus but I generally turn off the auxiliary LEDs of my flashlights. 10$ more for knurling and aux LEDs which I can do without is a price increase that is not worth it for me.

[Firelight2]

@Tally-ho

Is the D4v1 only sold out but will be restocked or will it be discontinued ?
I’m fine with mine like it is, a lighted switch would have been a plus but I generally turn off the auxiliary LEDs of my flashlights. 10$ more for knurling and aux LEDs which I can do without is a price increase that is not worth it for me.

I can’t think of a single light from any manufacturer where v1 stayed in production after v2 came out.

I suspect v1’s production run is done and all future D4s will be v2.