I want copper ts10 in 3000k. In 4000k I have one in aluminium and I don’t want to mod the led and aux.
Yes, aux is not a primary function but they are not useless for me. With other custom firmware I can use aux as I want. Also I prefer a warm tint. I am with SammysHP
2 Thanks
you could hire Adair21 to install whatever E21a LEDs and Aux color you prefer
1 Thank
Thank you and I love so much the project he do but I am in Italy so it’s not easy for me. Also for me modding is not a problem but I appreciate so much your suggestions
I was hoping for 3000k and single-color aux, that’s unfortunate 
2 Thanks
I would like that too.
Maybe after the Brass 3000K w Red Aux are sold out…
a future Copper batch could have 3000K and Red Aux
4 Thanks
With 3000k leds or lower
I think you need to up production, looks like the copper sold out in an hour… waited all this time lol!
1 Thank
I don’t think it’s actually been released yet, the AliExpress listing only sold 2x as having been sold. I’ve seen it elsewhere (reddit) that the actual planned release will be April 28th. What is on Ali is probably just a pre-listing.
Yes I saw that afterwards, and you may be right. Will be interesting to see what price it is as on Aliexpress it came up as £35 + vat (20%) so £42 all in which seems a bit pricey to me considering the brass one is £28.10 inc vat. Hopefully they might give a better price for BLF members 
I think the single color AUX LEDs suit the lamp more. So I will not buy a copper TS10.
Edit: I ordered a brass one 
@Wurkkos
What Revision ist the firmware in the copper TS10?
Has it the low battery warning for single color AUX-LEDs?
what is the purpose of your question?
The TS10 Brass and Copper, all use the same firmware as the latest TS10 lights… if you are asking for a link to the hex file, here it is
Im not aware of any low battery warning for Aux, but it does have LVP for the Aux
It is quite new
Rev 654. By Selene ToyKeeper on 2023-02-10
fast-blink the aux LED in standby when battery is low
3.3V and up: normal aux LED modes
2.9V to 3.3V: fast blink
under 2.9V: off
(only on lights with no RGB aux)
I think it isn’t mentioned in the Andúril 2 manual
1 Thank
RGB aux are fine but please, not nervous like in your video.
Almost instant epileptic
1 Thank
thanks for the new info
I dont have a brass nor copper TS10… so cannot say for sure, but sounds like a useful new feature…
I dont think we get to choose… there are slow or fast auto rgb aux…
this is the slow that Adair21 chose:
and this is the fast, that wurkkos has chosen:
there is a rumor that if the aux are set to blink, the rgb control wont have time to advance, so the Aux will blink in Red only. I have not seen confirmation yet.
2 Thanks
I think yes because the initial color is probably red every time the cycle restart, so every time the aux goes off the first color appear is the color for blinking mode or lockout mode
Uh there is even more new stuff! I just looked under
https://code.launchpad.net/~toykeeper/flashlight-firmware/anduril2
Rev 657 and 656 have a new tactical mode and reversing in blinky Modes
thanks, it also has a new thing that could maybe help control non auto cycling RGB aux on a future TS10 w normal RGB:
652. By Selene ToyKeeper on 2022-07-30
allow supporting single-color and RGB side button in the same build
(new D1v2 comes in both flavors, and it’s easier for everyone if
they can use the same firmware)
What do you think how this can help? It’s just a configuration change for another build target and almost a year old.