Hello siata94,
I do have a couple X6 triples, not potted, but I could fill them for ya. I will look to get specs and see if I have or can configure a matching tube light. Convoy S2 or S2+?? which would you prefer? Also have a convoy S3, JAXMAN E2 Grey and other A6 or S1 tube lights.
Here is a link to an X6 Triple with 219BT 4500K
I think it has a MtnE Fet driver with Guppy but if I gotta pot it I can swap to Bistro. Also have same emitter to build a tube of your choice.
Not sure of the mounting options out there but have either you or your buddy considered an Eagle Eye X7 triple with 26650 battery?
The X7 may be better because of the balance point being after the head bulge allowing it to clamp on the actual balance point. X6 would be head heavy in comparison. Not sure if you have issues with the lights tilting down as you ride in the rough. Abd the X7 longer run time, 5000mAh compared to 3000mAh batteries.
Empty the X6 is 185 grams and the X7 is 170 grm.
With batteries the X6 is 230 and X7 is 265.
X6 mounting is 24mm and the X7 is 32mm closer to head (balance point)
Both lights I measured are triples with Glass lenses and have copper spacers inside.
Comparison pics X6 vs X7
I have spare parts too, with a couple X6 and X7 lights to build on as triples.
I will list available XP32 boards with emitters already mounted, that I have on hand. I could easily match a tube light of choice to go with…
XP 32 Nichia triple boards
Nichia 219C 5000K D280 80+CRI
Nichia 219C 4000K D240 90+ CRI
Nichia 219BT 4000K D200 90+ CRI
Also the X7 shown above is built with
Kiriba-Ru copper spacer with XP32 MCPCB soldered to it with MtnE reflow XP-L HI V3 3C 5000K on top. Used MtnE 20mm Fet+1 Bistro, springs bypassed. Copper spacer thermal paste into head. Triple does well with this light. Feels great in the hand with the tube length and diameter, Full grip on the light.
Link to thread with pics
