Similar look but NO!
Inside of a bowl/mug/plate/crockery set piece.
No, it has nothing to do with anything in my kitchen or stuff related to it
Microscope picture of LED substrate metalized layer.
No,
XHP50 autopsy with some sanding to look inside
but here some of UV LEDs
I was thinking of the underside of a chip or the ceramic substrate side.
that’s remind me of my ex
Cross section of ceramic capacitor.
Well, you did not mention when the photo was created.
Ice can form at –1°C, very slowly thou.
Germany doesn’t have tropical climate so even –10°C or –15°C would be let’s say normal winter temperature.
At –10°C, –15°C in Siberia and Antartica they are putting on their swimming suits and enjoy the summer
I know, its residuo on the glass after yogurt tide
I was thinking of the underside of a chip or the ceramic substrate side.
At least resistor chip lets look different
Cross section of ceramic capacitor.
Almost there, specific type makes that pattern
Well, you did not mention when the photo was created.
Ice can form at –1°C, very slowly thou.
Germany doesn’t have tropical climate so even –10°C or –15°C would be let’s say normal winter temperature.
At –10°C, –15°C in Siberia and Antartica they are putting on their swimming suits and enjoy the summerI know, its residuo on the glass after yogurt tide
The photo was created today
Has nothing to do with kitchen including food
And what is it?
Sorry, I didn't make the pic big enough for you...
It's this:
Cheap thermal paste on an aluminium shelf after you remove a ledboard that has a too big gap under it.
Sea Monkey tracks on your aquarium wall.
CRX:I was thinking of the underside of a chip or the ceramic substrate side.
At least resistor chip lets look different
I think I’m getting closer
Was it made naturally or artificially?
White laser engraving on an aluminum surface under microscope?
Damascus-steel knife blade… for autopsying aliens.
fancy wallpaper?
Ahhh… clogged up sand paper or sharpening material?