To be entirely clear, it isn’t angry blue in the same way a 6500k emitter will be, but it clearly goes way up in CCT, I would be worried about burning it out or otherwise causing damage.
TS11 uses a proprietary copper MCPCB, I kind of overheated it so it looks nasty (hot plate broke so I used the stove, didn’t compensate for the extra thermal mass) but it works fine electrically, on the main emitter at least. Not proud of how it looks but re-doing it is a problem for later.
Miraculously all channels of AUX work fine, but a lot dimmer because of the now-dark LEDs. Hopefully a replacement MCPCB won’t be too expensive, this one won’t survive another reflow.
Before:
After:
Opple 3 readings for reference:
