Zebralight purchase input.

[beam0]

OK it doesn’t look good…
It’s a press fit

Quote from another thread:

@Bob_McBob

s. There is the issue of removing the bezel without damage, especially with the frosty lens, but you can approach it by pulling out the switch cover and working your way inside. Too bad the thread OP on CPF seemingly intends to take the secret of how to remove a press fit bezel without damage to their grave and is still ignoring PMs years later.

Zebralight SC64c (XP-L2) measurements or "why 2-step means squat"

I see what you mean from this old CPF thread about the SC52. It’s not so much getting it open, but what to do once it’s open. Even for a straight emitter swap, unless you can reflow in situ (I assume not), it would be almost impossible. I’ll echo maukka: Just give the ultimate EDC light to us with a decent emitter, please. http://www.candlepowerforums.com/vb/showthread.php?353932-Zebra-SC52-let-the-modding-commence-NOT! On the other hand, I believe the right angle lights still use a separate M…