4000k
3000k (NASA had me install these into a GT for them, looks like an incandescent light, pretty neat actually)
In the real world the 80cri have a much lower forward voltage and usually are only a little behind the 70cri in lumens from my testing. For example the P2 4000k in my L6 was a bit over 9k lumens and my 80cri M4 bin 4000k is around 8500 lumens, it just pulls about a fair amount more current to do that.
I can also get different xhp35 HI tints as well:
70cri D2 bin 5700k
80cri C4 bin 4500k
80cri C2 bin 4000k
80cri C2 bin 3000k
XHP35 HD (HD has the dome still on it, a bit less throw but more lumens, I like them in everything but a dedicated thrower myself):
Former Haikelite USA distributor replied: “Almost forgot. I Spoke with Dale last night. Haikelite knows nothing of their brand listing on Aliexpress so a little warning. Purchasing those are totally non authorized and will not be covered by the brand in any way.”
I would double check with Dale to see if this is true though. I personally tend to think the lights are legit.
I just checked, but there is no option for Paypal. Maybe you can contact the seller and transfer money via Paypal; this is also possible with Simon from Convoy on Aliexpress.
Interesting but true. I just changed the destination country on top of page to USA, and the Paypal logo just popped up. First time I experience region based Paypal option.
I think I read somewhere that HL will be using P2 bin emitters. If that’s the case, they should be getting 21k lumen sper Newlumen’s TA_tube measurements. That’s actually not far off from their 24k claim considering the majority of flashlight manufacturers way over specify their lumen ratings. It seems only Olight/Acebeam/Thrunite have been pretty spot on with their advertised lumens. I found even some premium brands like Zebralight overrate their lumens much more than that after testing it with my TA_tube.
HL had a 4000k 80CRI option for the GB. I bought both the 4000k 80CRI and 5000k 70CRI. The 5000k version was 32.3% brighter than the 4000k.
I really liked the tint on the stock 4000k 80CRI, which was almost as good as my 4000k 219b 9050. The tint was actually closer to the BBL than the one TA was using from Arrow. But the Arrow 4000k was much better than the same 4000k 80CRI from Mouser which is horrendously yellow.
MT09R mod on TA driver, all springs bypassed. 2120 20 057
MT09R NEW Series 1802 17 049
MT09R New with all springs bypassed. 1920 18165
I don't think that they are using new P2 led. All my MT09R has oryginal led so it looks like in new MT09R LED has higher VF or lower bin than thoese from group buy.