For Aesthetics.
Beam colour and feel in hand. x 200% on most others.
The Astrolux AO1 219B or c.
For ugliness and wierd shape. The Tool AAA.
End switch. Twisty and end cap circuit breaker??.
Nicely Bright.
but a wierd blend of multiple controls…
For Just being my fav Small Copper light,
My O’Light i3T EOS Copper.
Weighty. Great Shape and beautiful blended copper shades.
NOT órrible and shiny bright. Yuk…
With my Jetbeam Jet-1 MK Pro,
Still being the fav of my AA’s.
I really like the Wuben E01. It’s what I always EDC regardless if I have an 18650 light with me. No memory, always starts on low. Only thing I hate about it is 2 quick taps goes to SOS mode so you can’t change modes very quickly. It’s basically a Tool AAA with a different UI. It really needs a dc fix though even with an emitter swap IMHO.
My favorite LED during the day is the sw45k on the right
At night my favorite is the 3500k E21a on the left
I spent a lot of time with 219b 4000k, in the middle, but now I dont use it and prefer the other two
Seemingly by my very amateur runtime test. There could have been slight variances in batteries as I don’t have an analyzing charger to find out. I don’t know why it was able to run longer than the tool AAA since they to have the exact same LEGO-able head and same emitter—not sure about the internals though. I would be interested in seeing other runtime graphs.
I believe there is still strong interest for both CCT.
it would be helpful to know the R9 and DUV, of the new LEDs compared to the Yuji, which are some of the best in tint and CRI. I also really like the beam they produce
you made a lot of people happy with those, I think you could do it again if the new LED is similar in tint, cri, and beam …
btw, I am a strong proponent of NOT polishing the reflector, I prefer the Original C01 beam that had NO hotspot…
If you are familiar with 47s, only their 1st (and possibly 2nd) generation Preon P1s will accommodate the 10440. Check for voltage range in specs if able. And be mindful of overheating. Use on high briefly. Sorry for my slow response - I’ve been away for awhile.
The C01 is my favorite AAA flashlight. The light is gentle, pretty, and just right for cozy night time activities. Pairing what it does with how long it lasts on an Eneloop makes it the most valuable flashlight in my collection.
I got a few of the original run. When the colored ones came out, I ordered a bunch only to have them lost in the mail. Unfortunately, it was too late by the time I found out. I had missed my opportunity to stock up.
If the new 3400K version is close to how good the original Yuji version was, I’ll buy a few. Getting them with a green body would be incredible. Green is my favorite body color when I can get it.
I’d be happy to order a few of the 3400K versions - when I tried ordering the warm Yuji ones, they ended up lost in the mail and by the time I was offered a replacement, only the 5700K versions were left!
I’d say the demand is definitely there. People bought them up quick, and in large quantities. I think the fact that they come up for sale so rarely shows how sought after they are. I’ve seen 6 for sale, and bought 5 of them. Only missed out on one cause I was too busy that day to check the site. Only reason I have been able to get one of each color, in each CCT was because I convinced one of the 5 sellers I bought from to sell me another color.
I can’t imagine that these would not sell well again, they were so well liked and well received. Add in some new anodization colors and you give people who have already purchased a reason to buy more. Hell its been this long and I still can’t even find a duplicate of any of the old colors!
To fit the theme of the thread and stay on topic, here are two of my current favorites. Much like the C01, the Peak is single mode, which is my favorite for AAA twisties