KD (kaidomain): Deals and new products thread

[beam0]

@Marc E

@beam0

Hmmm… guess I was missing something then

The 3*XPL-HI drop-in at KD doesn’t list any CRI so I didn’t think it was high CRI so I never even noticed CRI90 in the line I copied from SKV89’s chart. :person_facepalming:

I didn’t see any other 3*XPL-HI modules listed on KD so I’m wondering if they changed the LED’s since SKV89 bought his? But anyway both modules he tested are high CRI.

Easily done
On the KD page for the module, as linked above, there is an option to the right of the picture to select available options, one of those is color temp under which 3000K is listed.

Yes. I know there are the CCT options there. I was trying to say KD’s listing doesn’t specify any CRI rating for any of the tint options for that module.

All other LED’s and modules on the KD website that are HI CRI are clearly advertised as such, and even listed in the titles. So my thought was maybe there previously was a HI CRI 3*XPL-HI module listing when SKV89 bought his, but now since BurningPlayd0h enlightened me I see that all XPL-HI 3000k would always be at least CRI90, but you wouldn’t know that from the KD listing if you didn’t already know.

[Marc_E]

@beam0

Yes. I know there are the CCT options there. I was trying to say…

Ah, i’m with you now, i misunderstood what you were saying, apologies. I agree, the implication is it’s not HCRI unless stated so….

BanL - It seems the 3000K option in the following listing is CRI90 but this is not stated. Can you check and update the listing if necessary please? Thanks

Kdlitker 3x XPL-HI 3000K

[BanL]

Hi

I get your points.

I will add once more option for Warm White 3000K high CRI version to make sure it will install with high CRI LED.

Regards

Ban

[Skylight]

New interesting SST20 leds found on KD: 5000K SST20 L5 DD , 4000K SST20 K2 FD2 , 2700K SST20 J3 JA3

[SKV89]

@Skylight

New interesting SST20 leds found on KD: 5000K SST20 L5 DD , 4000K SST20 K2 FD2 , 2700K SST20 J3 JA3

That 5000K L5 DD would be amazing if bins are true. Highest possible flux bin with a tint similar to the Cree 3A!

I have serious doubt that FD2 is legit. I’ve come to believe that Luminus don’t even make this bin. But I will buy one just to try it.

The JA3 is a very nice 2700K. I tried Fireflies version and it is one of the better WW emitters I’ve tried.

[id30209]

FD2 bin?

Ban is this confirmed?

[BanL]

Yea, it is coming from the new wheel.

We are starting to use with this.

Thank you

[Nicolicous]

is 5000K L5 DD below BBL?

[Tom_E]

@Nicolicous

is 5000K L5 DD below BBL?

Mostly, see here: https://download.luminus.com/datasheets/Luminus_SST-20-WxS_Datasheet.pdf

Seems like you need 3500K or lower to have bins 100% below BBL: https://www.mouser.com/datasheet/2/245/Luminus_SST-20-WxH_Datasheet-1499224.pdf, like for GA2 and GA3

[SKV89]

Crap I was thinking FD1. FD2 is not rosier than FA3 :person_facepalming:
,

@SKV89

@Skylight

New interesting SST20 leds found on KD: 5000K SST20 L5 DD , 4000K SST20 K2 FD2 , 2700K SST20 J3 JA3

That 5000K L5 DD would be amazing if bins are true. Highest possible flux bin with a tint similar to the Cree 3A!

I have serious doubt that FD2 is legit. I’ve come to believe that Luminus don’t even make this bin. But I will buy one just to try it.

The JA3 is a very nice 2700K. I tried Fireflies version and it is one of the better WW emitters I’ve tried.

[hodor]

@SKV89

The JA3 is a very nice 2700K. I tried Fireflies version and it is one of the better WW emitters I’ve tried.

Looks even nicer with a slice. Hotspot get’s super small though.

[BlueSwordM]

I have not received any confirmations that the FD2 bin can be attained with the K2 brightness bin yet.

[Nicolicous]

Hey BanL

can you get some 5050 LED or 3535 LED Lens Diameter 17mm 20 30 45 60 degrees Bead surface

i need about 5 to 10 pieces.

17mm dia TIR lense

[leaftye]

BanL, are the JKK lights your design?

[Chatika_vas_Paus]

I do not think so. They can be found in many strange stores on Ali. I bought in one of them.

[BanL]

Hi friends

New KDLITKER C21 with Cree XHP70.2 is available

KDLITKER C21

Enjoy

[SKV89]

http://kaidomain.com/Flashlight-DIY-and-Tools/LED-Emitters-or-LED-Star-on-PCB/CREE-XP-L-Series-LEDs/Cree-XP-L-HI-U4-7A2-Warm-White-3000K-3500K-LED-Emitter

Kdlitker 3x XPL HI 3000K U4 7A2 CRI80 P60 no lens	low	34 lumens	3014K	-0.0034 DUV	84.8 CRI	Blue light relative amplitude 0.61	22.7 R9	72.6 R12	82 Rf	101 Rg	2xVTC6 in Kdliker E6-EX18
Kdlitker 3x XPL HI 3000K U4 7A2 CRI80 P60 no lens	M1	103 lumens	3006K	-0.0033 DUV	84.6 CRI	Blue light relative amplitude 0.60	21.9 R9	72.4 R12	81 Rf	101 Rg	2xVTC6 in Kdliker E6-EX18
Kdlitker 3x XPL HI 3000K U4 7A2 CRI80 P60 no lens	M2	448 lumens	3032K	-0.0026 DUV	83.7 CRI	Blue light relative amplitude 0.60	18.6 R9	71.1 R12	81 Rf	101 Rg	2xVTC6 in Kdliker E6-EX18
Kdlitker 3x XPL HI 3000K U4 7A2 CRI80 P60 no lens	Highest	1,122 lumens	3117K	-0.0040 DUV	83.1 CRI	Blue light relative amplitude 0.63	16.7 R9	71.2 R12	80 Rf	101 Rg	2xVTC6 in Kdliker E6-EX18

[G0OSE]

Mines been ok from KD, pretty much normal, 2/3 weeks, sometimes quicker.

[Unloco]

@MoreLumens

I know shipping times are kinda long now, but still gotta ask because one of my order got here pretty quickly which I ordered at 24/02/2020, but two other orders 17+18/03/2020 havent arrived yet. Same shipping method un-registered airmail. Anyone else has similiar waiting right now?

I waiting two orders (13/03/2020 and 29/03/2020), both SG registered shipping.
The one from 13/03/2020: 2020-03-26 Despatched to overseas (Country code: UY)
The one from 29/03/2020: 2020-04-04 Information Received – Item En Route to Postal Facility

[Barkuti]

I was going to say “pretty good R9 values” in the above table by SKV89, but after going to quote the post I see the 70+ figures are for R12. Now I see how it works, but it's weird to see that the table frame isn't shown or is set invisible. Maybe it is easier on the eyes to list the value identifiers, a colon, and then the corresponding value (R9: 22.7 R12: 72.6 Rf: 82…).