EAGLE EYE X6 XPL HI V21A 1200lunens LED flashlight Free shipping $22.13

392 posts / 0 new
Last post

Pages

Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37
EAGLE EYE X6 XPL HI V21A 1200lunens LED flashlight Free shipping $22.13

EAGLE EYE x6

Power cut memory function,hidden explosion-flashing function(When lit it up in any gear,half-press the trail twice fast,it is in the explosion-flashing gear,and half press again,return to the lighting model)
energy saving gear 5ma—-intermediate light 300ma—-highlight 1.8A—-bright light3.5A(decreasing to highlight automatically three minutes later)










Edited by: Shenzhen Jin La... on 08/26/2015 - 23:49
marcl
Offline
Last seen: 1 year 7 months ago
Joined: 01/30/2012 - 09:02
Posts: 1780
Location: United Kingdom

Looking good.

Eagles may soar, but weasels don't get sucked into jet engines!

djozz
djozz's picture
Online
Last seen: 9 min 29 sec ago
Joined: 09/07/2012 - 17:04
Posts: 16550
Location: Amsterdam

Nice with the XP-L Hi. At 3.5A a DTP copper board is not strictly neccessary but would help increasing output (10%?).

Two screws that both do not fix the ledboard! Laughing

 

The 'BLF special edition' will live on in China long after the forum has deceased! :bigsmile:

raccoon city
raccoon city's picture
Offline
Last seen: 31 min 48 sec ago
Joined: 10/06/2010 - 02:35
Posts: 13979
Location: रॅकून सिटी Palm Desert CA USA

I seem to be experiencing déjà vu.   :bigsmile:

freeme
freeme's picture
Offline
Last seen: 3 hours 59 min ago
Joined: 11/14/2013 - 22:00
Posts: 8234

True 3.5A this time? $21.59 with free shipping seem to be a good deal. 

Explosion-flashing
 

M4D M4X
M4D M4X's picture
Online
Last seen: 1 min 55 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8087
Location: Austria (GMT + 1)
Quote:
Max Output: 1600lumens (max) (use 18650 protected power battery)

wait – what? Wink

any info about the driver?

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

BIG THANKS for helping me by using my REFLinks

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

djozz
djozz's picture
Online
Last seen: 9 min 29 sec ago
Joined: 09/07/2012 - 17:04
Posts: 16550
Location: Amsterdam

M4D M4X wrote:
Quote:
Max Output: 1600lumens (max) (use 18650 protected power battery)
wait - what? Wink any info about the driver?

At 3.5A those will be ledlumens, not OTF

keithd
keithd's picture
Offline
Last seen: 1 month 3 weeks ago
Joined: 04/12/2014 - 00:35
Posts: 798

How hard would it be to put a quad under the hood of one of these? Big Smile I saw DB Custom’s quad-XP-L and thought, “I want one!”

I’m getting a BLF A6 and a BLF D80, the appeal to me is having another BLF-marked light. Smile

Halo...
Halo...'s picture
Offline
Last seen: 3 years 6 months ago
Joined: 12/15/2011 - 02:39
Posts: 3304
Location: Halo island

Do not label it “BLF” if you are not using a Copper MCPCB with direct thermal path. Did any BLF member from the X6 groupbuy ok this? You can call it a “special edition” but I personally do not want to see “BLF special edition” added to any inferior version (without an ok from the groupbuy organizers).
The BLF special edition used a Copper MCPCB with direct thermal path.

Shenzhen Jin Lang Electronic Technology wrote:

Soon when we see someone with a “BLF special edition” we will have to ask: Is that a real one or the “other” version?

And before someone brings it up, yes, I know we can’t stop some junkfire brand from using any name they want but it is different when it’s a company we have worked with.

Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37

OK, thanks for your advice. I will correct it

M4D M4X
M4D M4X's picture
Online
Last seen: 1 min 55 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8087
Location: Austria (GMT + 1)

so its a faked “quality approved by BLF“ … Flat Stare

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

BIG THANKS for helping me by using my REFLinks

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

breinrules
breinrules's picture
Offline
Last seen: 1 year 8 months ago
Joined: 10/04/2014 - 02:25
Posts: 581
Location: Cebu, Philippines

How much is xpl hi by the way compared to xml2?

Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37

Because it only sold in BLF, so use the BLF, is my thoughtless,sorry

M4D M4X
M4D M4X's picture
Online
Last seen: 1 min 55 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8087
Location: Austria (GMT + 1)

it is no “blf special edition“ – so its a fake (as it is sold now)

we all would love a thread from EE to ask our favours
then they may offer how far they can go
then, maybe they sell a lot

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

BIG THANKS for helping me by using my REFLinks

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

bugsy36
bugsy36's picture
Offline
Last seen: 8 months 2 weeks ago
Joined: 07/11/2014 - 18:15
Posts: 2475
Location: Florida USA

Easy guys. EE is trying. If there is no copper and copper is wanted then all that is needed is to tell them that DTP copper is required. I am sure that EE will try and cooperate. All he has done is leave out Banggood and come here directly. There is room for everybody to make flashlights for us the way we want them to be made Smile

Added edit:

If "BLF" was not on the tube and light was named "Special Edition" then it could also be advertised on the "other" forum but they too will only want with DTP copper for the emitter. The only other issue is Aliexpress. Many will buy from Aliexpress because they cannot use PayPal. If a vendor is chosen (hopefully Banggood because they do help sales) then there should be only one vendor to avoid counterfeit "EE Special Edition" lights like we saw in the past.

It's the simple things that we take for granted that cost us the most

Ευκαιρία λέει πιάσε με από το μέτωπο γιατί μόλις έχω περάσει δεν θα με πιάσειs

freeme
freeme's picture
Offline
Last seen: 3 hours 59 min ago
Joined: 11/14/2013 - 22:00
Posts: 8234

Eagle Eye logo is more then enough, you don't have to rely BLF logo to sell this light. Specs speak louder than words.

Shenzhen Jin Lang Electronic Technology wrote:
Because it only sold in BLF, so use the BLF, is my thoughtless,sorry
Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37

This circuit has joined temperature protection,also adopted the high thermal conductive substrate,I’ve tested a lot of samples,no problem

bugsy36
bugsy36's picture
Offline
Last seen: 8 months 2 weeks ago
Joined: 07/11/2014 - 18:15
Posts: 2475
Location: Florida USA

Shenzhen Jin Lang Electronic Technology wrote:
This circuit has joined temperature protection,also adopted the high thermal conductive substrate,I've tested a lot of samples,no problem

So that is DTP but aluminum instead of copper...correct? (Just so others understand)

It's the simple things that we take for granted that cost us the most

Ευκαιρία λέει πιάσε με από το μέτωπο γιατί μόλις έχω περάσει δεν θα με πιάσειs

M4D M4X
M4D M4X's picture
Online
Last seen: 1 min 55 sec ago
Joined: 03/19/2014 - 05:17
Posts: 8087
Location: Austria (GMT + 1)

… a sample to a valued member will increase sales Wink

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

BIG THANKS for helping me by using my REFLinks

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

djozz
djozz's picture
Online
Last seen: 9 min 29 sec ago
Joined: 09/07/2012 - 17:04
Posts: 16550
Location: Amsterdam

bugsy36 wrote:

Shenzhen Jin Lang Electronic Technology wrote:
This circuit has joined temperature protection,also adopted the high thermal conductive substrate,I've tested a lot of samples,no problem

So that is DTP but aluminum instead of copper...correct? (Just so others understand)

I assume not, but there are boards out there that are not DTP but do perform better than others. I tested a non-DTP  board (the base was copper, but in my opinion that was not crucial for the performance) in a comparison test of six ledboards, that performed surprisingly well, at 3.5A the light output was only 2% less than the DTP-boards, only over 5A it really began to perform less than the DTP-boards. link

For example, if the traces on the ledboard are of higher thickness copper and close to the led they widen into a 'poor' over the board surface (this one could be that way), the heat can go sideways and cross the dielectric layer over a large surface, thus helping the shedding of the heat in a different way than a DTP does.

In practice, some of the BLF-dogma's appear to be more nuanced than we think.

chuckhov
Offline
Last seen: 1 year 5 months ago
Joined: 12/24/2014 - 02:57
Posts: 1178
Location: Florida, AKA God's Waiting Room

I’d only be willing to buy one if I could pay with PayPal.

And, it really has to have the DTP Copper MCPCB.

The XP-L HI is what I am wanting for this light!

Thanks,
-Chuck

Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37

If you are not rest assured on aluminum substrate,I can use copper substrate,welcome to discuss

Shenzhen Jin La...
Shenzhen Jin Lang Electronic Technology's picture
Offline
Last seen: 2 years 11 months ago
Joined: 01/12/2015 - 21:46
Posts: 37

The role of the two screws is to stop running,if lock the substrate,it will be an affect on center positioning,that it is not reasonable.

bikenber73
bikenber73's picture
Offline
Last seen: 7 hours 46 min ago
Joined: 11/12/2011 - 15:09
Posts: 2026
Location: Maryland USA

EE has some fairly good deals on their site. I nicely built C8 for 13.99. I would like to see some more lights with XPL-HI in them. Only because I have many of these already! 

bikenber73
bikenber73's picture
Offline
Last seen: 7 hours 46 min ago
Joined: 11/12/2011 - 15:09
Posts: 2026
Location: Maryland USA

Thanks Again EE

DavidEF
DavidEF's picture
Offline
Last seen: 6 days 4 hours ago
Joined: 06/05/2014 - 06:00
Posts: 7698
Location: Salisbury, North Carolina, USA

Shenzhen Jin Lang Electronic Technology wrote:
If you are not rest assured on aluminum substrate,I can use copper substrate,welcome to discuss

Aluminum substrate is fine. What people are asking for is Direct Thermal Path. The center pad on the LED is the thermal pad. The corresponding thermal pad on the MCPCB needs to be able to conduct heat away effectively from the LED. A Direct Thermal Path MCPCB has no dialectric layer under the thermal pad. It has direct contact from the aluminum or copper substrate to the LED thermal pad. The LED+ and LED- pads have dialectric under them to insulate them electrically from the metal substrate. It is only the thermal pad which is better to not be insulated.

The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy

DavidEF
DavidEF's picture
Offline
Last seen: 6 days 4 hours ago
Joined: 06/05/2014 - 06:00
Posts: 7698
Location: Salisbury, North Carolina, USA

keithd wrote:
How hard would it be to put a quad under the hood of one of these? Big Smile I saw DB Custom’s quad-XP-L and thought, “I want one!”

I’m getting a BLF A6 and a BLF D80, the appeal to me is having another BLF-marked light. Smile


keith, I haven’t done this, but from reading about others doing so, it appears that it’s quite easy to do, if you’ve got a steady hand and decent soldering skills. You will need a spacer, though, since the quad optic is shorter in length than the original reflector. Nitro was selling copper spacers for a while, but I’m not sure what the current status is. You can ask DB Custom in a PM. He might be able to tell you what is currently available.

The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy

Halo...
Halo...'s picture
Offline
Last seen: 3 years 6 months ago
Joined: 12/15/2011 - 02:39
Posts: 3304
Location: Halo island

Aluminum MCPCB can be ok if it’s DTP. The important part is the Direct Thermal Path (DTP). The mcpcb in your picture does not appear to be DTP.

Here is a picture that might help better then words.

DB Custom
DB Custom's picture
Offline
Last seen: 6 hours 20 min ago
Joined: 01/13/2013 - 22:28
Posts: 20643
Location: Heart of Texas

Might be able to make the spacer myself, soon. Gotta level the lathe and start playing with SOMETHING, a simple spacer should be a nice project. Smile

SinkPAD makes a DTP Al mcpcb, so this Could have DTP, which may not be a bad thing. The instant access to strobe might could be changed to instant Turbo access? Sounds pretty cool to me.

Glad to see EE here making the effort.

BUT, as has been said… BLF Special Edition means quite a few members of BLF saw to it that it was indeed special, it’s not just a name.

Halo...
Halo...'s picture
Offline
Last seen: 3 years 6 months ago
Joined: 12/15/2011 - 02:39
Posts: 3304
Location: Halo island

DB Custom wrote:
SinkPAD makes a DTP Al mcpcb, so this Could have DTP, which may not be a bad thing.

But the mcpcb in EE’s picture appears to be non-DTP. If you enlarge the picture you can see the outline of three copper traces, positive, negative and a center copper pour which is found on non-DTP mcpcbs to spread the heat from the center thermal pad out horizontally, giving it more area to help get through the dielectric layer.
antiparanoico
Offline
Last seen: 1 day 8 hours ago
Joined: 07/14/2013 - 19:17
Posts: 1160
Location: Wandering the world.

Free shipping? WOW!!!!

If anything can go wrong, it will.
Matter will be damaged in direct proportion to its value.

Pages