This is my first time seeing this project. I’d say it’s worth picking up. It’s enough different than the Q8 in both form and function, IMHO. I haven’t read through the thread. Someone may have already mentioned, but I will say it anyway: it will probably be better to have orange peel reflectors to help dissipate the probable donut effect from the quad-die emitters.
EDIT: I just did a “Search in thread” and saw that the reflector was supposed to be changed to orange peel already. Just the prototype in the first post has a smooth reflector.
—
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
There are definitely more room for newer designs for this class of light. Form factor has to be smaller than MT03. Around HaikeLite Q30 size and price maybe?
BlueSwordM wrote:
Doesn't the Haikelite MT03 TA already fulfill this role?
Doesn’t the Haikelite MT03 TA already fulfill this role?
Some problems with the driver were discovered by members of the forum.
Note, this might only apply to the MT09R. –
The original drivers were breaking a lot. These were later replaced by some that Texas_Ace designed. The 50 or so that TA built personally worked 100%. The ones Haikelite build still had problems. Maybe due to counterfeit components? Plus they still had other quality control problems such as the pins in the tail cap breaking off, contacts shorting in the tail cap, stripped screws, etc… I really don’t know if they ever got all this sorted out. Replacement parts took forever for people to get. Some are probably still waiting.
So Haikelite is not exactly creating positive thoughts with people.
As far as differentiating the UT03 from the MT03 I found this size comparison.
Astrolux MF01, Haikilite MT03, Utorch UT03.
At the time of the Group Buy, the UT03 had a projected cost of only $50. So being cheaper, smaller, prettier and still good quality (yet to be determined) you can see why it was so desirable. I definitely wanted one.
I saw the same complaints at MT09 and at MT03 – the flashlight cannot be turned off completely and the glow gradually increases.
Earlier there was a blinking of emitters. I am against such a lottery.
I interested , depending on price.
Thanks!
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
Gearbest did quit. Don’t know how many still want it….
Sofirn is owned by a factory. Contact us for any lights you would like to make or to become a Sofirn dealer
Sofirn Flashlight Deals Group
AMAZON US Store
Authorized AMAZON DE Store
AMAZON JP Store
AMAZON CA Store
AMAZON AU Store
Aliexpress Worldwide Store
Thailand Shopee Store
Malaysia Shopee Store
Philippines Shopee Store
I’d say a few would still get it
This is my first time seeing this project. I’d say it’s worth picking up. It’s enough different than the Q8 in both form and function, IMHO. I haven’t read through the thread. Someone may have already mentioned, but I will say it anyway: it will probably be better to have orange peel reflectors to help dissipate the probable donut effect from the quad-die emitters.
EDIT: I just did a “Search in thread” and saw that the reflector was supposed to be changed to orange peel already. Just the prototype in the first post has a smooth reflector.
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
An affordable triple CREE XHP70.2 package would still be attract lot attentions from BLFers.
1theDeals / TeamFreeme / Freeme Club
Doesn’t the Haikelite MT03 TA already fulfill this role?
My very own high current Beryllium Copper springs: http://budgetlightforum.com/node/64047
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
There are definitely more room for newer designs for this class of light. Form factor has to be smaller than MT03. Around HaikeLite Q30 size and price maybe?
1theDeals / TeamFreeme / Freeme Club
Some problems with the driver were discovered by members of the forum.
Sorry for my poor english.
Note, this might only apply to the MT09R. –
The original drivers were breaking a lot. These were later replaced by some that Texas_Ace designed. The 50 or so that TA built personally worked 100%. The ones Haikelite build still had problems. Maybe due to counterfeit components? Plus they still had other quality control problems such as the pins in the tail cap breaking off, contacts shorting in the tail cap, stripped screws, etc… I really don’t know if they ever got all this sorted out. Replacement parts took forever for people to get. Some are probably still waiting.
So Haikelite is not exactly creating positive thoughts with people.
As far as differentiating the UT03 from the MT03 I found this size comparison.
Astrolux MF01, Haikilite MT03, Utorch UT03.
At the time of the Group Buy, the UT03 had a projected cost of only $50. So being cheaper, smaller, prettier and still good quality (yet to be determined) you can see why it was so desirable. I definitely wanted one.
KSGER STM32 2.1S Soldering Station Videos - Review Soon
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
I saw the same complaints at MT09 and at MT03 – the flashlight cannot be turned off completely and the glow gradually increases.
Earlier there was a blinking of emitters. I am against such a lottery.
Sorry for my poor english.
Pages