I have the Ganzo G706 with the aluminum scales that is now discontinued. Glad they brought it back. It's even cheaper now and has G10 scales which I would prefer over the one I have. It's an awesome little knife and I highly recommend it!
The G10 scales on the new one should show far less wear than the anodized aluminum scales on my older one. Everyone should have this knife! ;)
Sanrenmu 7010LUI-SH Stainless Steel Folding Knife and Sanrenmu 7010LUQ-S. I looks like a new knife and a little bit more expensive the used look knife. Blade Length 70 mm - Close Length 95 mm - Open Length 165 mm. Price new look $8,83 and used look $9,27. My link - non aff-link
GANZO G715 Stainless Steel Folding Knife, half serrated blade Blade Length 71 mm - Close Length 102 mm - Open Length 173 mm, Blade Thickness 3mm. Price $17,15 . My link - non aff-link
GANZO G710 Stainless Steel Folding Knife, Blade Length 96 mm - Close Length 114 mm - Open Length 210 mm, Blade Thickness 3mm. Axis lock. It looks like a Benchmade Rift. Price $17,84 . My link - non aff-link
GANZO G706 Stainless Steel Folding Knife, Blade Length 52 mm - Close Length 88 mm - Open Length 140 mm, Blade Thickness 3mm. Price $9.06 . My link - non aff-link
GANZO G706-2 Stainless Steel Folding Knife - the double blade version of the G706. One balde is fine, one is serrated, Blade Length 52 mm - Close Length 88 mm - Open Length 140 mm, Blade Thickness 3mm. Price $11.28 . My link - non aff-link
If you don't like serrated blades, the single blade version is available now. Awesome EDC knives the G706/G706-2 are! perfect for any job where you need to cut open packages and boxes or around the house for cutting cord and rope.
And some more reflektors with LED / driver and without. Size 46, 52, 68, 78, 88, 110mm.
Price range for only the reflectors: $2,06-3,21My link, non aff-link
@Xatu:
If the Sipik should fit really tight in the holster, I would try the NaitHawk. If not, I would try the Jetbeam with the battery case on the side (like this feature to have a replace battery with you).
Damn, that’s another SanRenMu 710 that I’ve ordered. Need to get the camo ones now.
I bought the GANZO G706-2 Dual Bladed knife a while ago not expecting much, bit of a change of shape with the unusual pivot.
I was and still am impressed by the serrations that actually work and the bladesteel is a good 4116, Cold steel use it in tghe budget range.
14mm Copper Base Plate for Cree XM-L / XM-L2 LED Emitters14mm*1mm, price $1,32 (with BLF $1,25). I don't find 14mm base of Noctigon on INTL Outdoor - this could be a good possibility if you need a 14 base and don't want t o cut down a 16mm base. My link - non aff-link
If someone want to combine a few of this small LEDs (1W 115LM 6000-6500K Pure White LED Emitter3.0-3.7V / 350mA / 120-140 degree beam angle price $0,91 each (with BLF $0,86), there are 112mm and 128mm bases (not for CREE LEDs useful):Aluminum Base Plate for 12-Piece LED Emitters price $2,12 (112mm) / $2,98 (128mm) with BLF 5% less. LED Link - Base Link - non aff-link
Upon a serious note, buy a quality rotary tool.
Anything below a Dremel is unsafe imho.
They’re made from cheap out of balance parts, spinning at many thousands of revolutions per minute.
Asking for trouble and fatigue just trying to keep it steady.
Blade Length 79 mm Close Length 101 mm Open Length 180 mm Product Weight 98 g Thickness 2.9 mm, Price $8,71My Link - non aff-link
HARNDS CK8002 Nyx Stainless Steel Folding Knife, 8Cr14MoV, liner lock
Blade Length 80 mm Close Length 103 mm Open Length 183 mm Product Weight 108 g Thickness 3 mm, price $9,56 My link - Non aff-link
I have that CK6013 Knight. It's a clone of the Kershaw Volt ii which I also have and am intending to post a comparison review. Basically tto me the CK6013 is just a "meh" knife, nowhere near the Kershaw quality. Two nylon washers make it slow to open and rather stiff. Ok for the price and may be very good with the washers replaced.
Interesting to see the clone of the Kershaw Brawler too.
Navy K632 Stainless Steel Folding Knife w/ Carrying Pouch and Clip,
Blade Length 100 mm Close Length 125 mm Open Length 225 mm Product Weight 135 g Thickness 2.9 mm, Price $15,95. My Link - non aff-link
NAVY K631s (full serrated) Stainless Steel Folding Serrated Knife w/ Carrying Pouchblack and Clip. Blade Length 100 mm Close Length 125 mm Open Length 225 mm Product Weight 135 g Thickness 2.9 mm, Price $18,08. My Link - non aff-link
NAVY 2001 Multi-functional Stainless Steel Pry Bar EDC Toollength 72mm / thickness 3mm, Product Weight 14 g , Price $6,09. My Link - non aff-link
Keith KR1102Titanium Outdoor Hiking Snap Hook Carabinerw/ mouth of bicycle steel wire-steel or Keith KR1101 w/ 8-12mm hexagon wrench & ruler & mouth of bicycle steel wire-steel. Price $6,56 (1102)/$6,80 (1101) My link - non aff-link
Sunwayman V20C-Y 1*Cree XM-LU2 480-Lumen Fully Variable Tactical LED Flashlightblack / 2*CR123A / 1*18650 / magnetic control ring. Super-low Current Standby > Stepless Dimming 0.5~480 Lumens > Strobe, Standby current is 50 μA when the light is at OFF mode, Price $41,62 (save 5% more with BLF). My Link - non aff-link
24.5mm Traffic Wand for Flashlights in white, yellow or red. Price each: $1,52 (with BLF $1,44) My link - non aff-link
Nitecore NWS20 Outdoor Emergency Whistle,TC4 titanium, maximum sound intensity of 120 decibels, price$29,03 (BLF coupon don't work, sold in other shops, ebay etc. for $39-40 or more). My link - non aff-link
Dang! I’d jump on this one if I didn’t already have the SRT-6. I vaguely remember when it first appeared sometime ago the SWM V20C was priced in the region of $85-$90. At $39 I guess it’s going to be sold out soon.