Thanks. Tricky timing but much better than the 2% success I was having when trying to switch it off during the blink which worked nearly 100% with two blinks.
Picked up mine today at the post office and went through the checklist as thoroughly as I wanted.
LED’s very well centered.
No rough spots outside, only a single tiny ding on the anodizing near the button (nitpicking).
Indicator light works for now at least.
All I did was some light sanding of the battery tube edges to prevent battery wrapper damage and of course some Nyogel for the threads and o-rings.
Overall, a quality specimen so far, zero complaints. Thanks everyone involved for making this happen!
tomm will be 2 weeks fedex has had the label created ?
man makes you wonder….
Travel History
Date/Time
Activity Location
9/29/2017 - Friday
8:25 am Shipment information sent to FedEx
Select time zone
Shipment Facts
Hide
Tracking number &&&(&(&(*&
Reference &&&&&^*&
Dimensions 6x4x2 in.
Terms Shipper
Service FedEx SmartPost
Weight 1.1 lbs / 0.5 kgs
Total pieces 1
Packaging Package
Fedex is messed up. Either their tracking is BS, or they don’t know how to read a map.
To go from burbank Il, to Bridgview… it’s like the same town, But THEN to New Berlin WI
It is actually farther from me today, than yesterday
WTH?
9/27/2017 - Wednesday
7:52 am Shipment information sent to FedEx
2:14 am Arrived at FedEx location FEDEX SMARTPOST LOS ANGELES, CA
5:37 am Departed FedEx location FEDEX SMARTPOST LOS ANGELES, CA
10/05/2017 - Thursday
8:37 pm In transit NEWBERRY SPRINGS, CA
9:48 am In transit MORIARTY, NM
10/06/2017 - Friday
10:55 pm In transit MIAMI, OK
10/07/2017 - Saturday
11:20 am In transit BURBANK, IL
10/08/2017 - Sunday
6:07 pm In transit BURBANK, IL
4:23 am In transit BRIDGEVIEW, IL
10/09/2017 - Monday
7:53 pm Arrived at FedEx location FEDEX SMARTPOST NEW BERLIN, WI
Hi everybody,i just got my Q8 and playing around,it is in 1 mode Turbo and cannot get back to original modes; my unit is one of the first 500 batch,tried factory reset……but no way
_” PMs send to those with issues, please check.
If I have not missed anybody all with issues should have gotten a PM, if not, let me know. I am collecting the information so we can make haste with the solution(s)….“_
Not sure if to count myself as having issues yet, but would like to be on the issues list just in case, this is what I reported…
“have to report that both my switch leds have randomly decreased in intensity to about half as bright as when I first received it, and sometimes they go back to the original full brightness for a few seconds then return to this lower level, I like the lower brightness level that it has now, looks more acceptable for a switch now, but I’m wondering if they will fail later on…”
English is not my native speaker, so, I’m not quite understand all the instruction in post#2.
Could you please advise how to switch between Ramp mode and Mode setting ?. Thank you.