Got my leds a few days ago, and I must say, they are really nice. The LH351Ds trump my 4000K nichias in just about every aspect, more output and less tint shift, but they are a little bit colder (4200K). I put some in a triple and it’s awesome.
The 3000K LH351Bs are also nice and warm, and are a perfect fit for previous XP-G2 lights.
Did AEDe go missing? ( he has been offline for 8 + days. I sent him some messages but haven’t heard back. (been trying to get 4 of each of the 3000K & 4000K high CRI LH351’s for the BLF Lantern project testing.
—
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
When I’m not at home or on holiday, I still daily check in on BLF but I consider that as borderline idiotic behaviour, perhaps AEDe lives a more normal life than some of us
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice. The tint is very even, but still not perfect, the corona ist yellow.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
This seems really nice…
Would you spare some with me ?
—
"-X3-, is there any place in your house without a flashlight ?"
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
This seems really nice…
Would you spare some with me ?
Sorry, I only got a very small amount which I intend to use all.
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
This seems really nice…
Would you spare some with me ?
Sorry, I only got a very small amount which I intend to use all.
Understood
Anyone else in EU ?
—
"-X3-, is there any place in your house without a flashlight ?"
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
I’m also interested in trying an LH351D it in a reflector light, so I might stick one in my C8, which is kind of ugly with a 219C. It looks great as drop-in replacement in all the 3V Armytek lights and also behaves much better with a XP-L size optics because the size is much closer. I’m really happy to have an option that is physically so similar to the XP-L. I do notice a tint shift with current as well, but it looks pretty good on all levels, and especially at higher output. Since the 219C is often a little green to begin with it subjectively seems rather similar side-by-side.
If I keep them they will all be used, but I can spare 2 leds for good cause.
Unless someone else has bought too many?
That’s really nice from you Djozz !
To be honest was hoping to buy 4 for a single and a triple but I can always test it with one or two and buy more later if this can happen
—
"-X3-, is there any place in your house without a flashlight ?"
LOL I wasn’t expecting that much help !
I’m underestimating BLF though, this place has proven more than once to be filled by big hearted people
Please give me your price, including shipping via PM
—
"-X3-, is there any place in your house without a flashlight ?"
The LH351D/B would be suitable in your case. Just be careful you don’t burn your hand
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
Use the B if you can.
I still got the wonky TK05 with loose LED, so I think I’ll stick a B on there.
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
12,000 posts later…
Got my leds a few days ago, and I must say, they are really nice. The LH351Ds trump my 4000K nichias in just about every aspect, more output and less tint shift, but they are a little bit colder (4200K). I put some in a triple and it’s awesome.
The 3000K LH351Bs are also nice and warm, and are a perfect fit for previous XP-G2 lights.
Did AEDe go missing? ( he has been offline for 8 + days. I sent him some messages but haven’t heard back. (been trying to get 4 of each of the 3000K & 4000K high CRI LH351’s for the BLF Lantern project testing.
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
I wouldn’t worry until next week.
He said the last order was mine at 10pcs of 351Bs, and he said to wait for about 2 weeks until he could get
So until next week, I’m not really worried. We should wait a bit. I’m going to PM him next week if he doesn’t respond.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
My order was shipped a few weeks ago…still waiting for it. Looking forward to build a triple with them.
When I’m not at home or on holiday, I still daily check in on BLF but I consider that as borderline idiotic behaviour, perhaps AEDe lives a more normal life than some of us
link to djozz tests
I received my second order of 10 LH351Ds in Ontario today, shipped April 18.
καὶ τὸ φῶς ἐν τῇ σκοτίᾳ φαίνει καὶ ἡ σκοτία αὐτὸ οὐ κατέλαβεν
Dc-fix diffuser film >… http://budgetlightforum.com/node/42208
http://budgetlightforum.com/comment/1319124#comment-1319124
My order of LH351B´s arrived in Denmark today shipped April 24.
Is it still possible to order some o those little gems ?
I totally missed that thread for an unknown reason
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
Unknown. I sent him a PM inquiring on some of these too, but has has not logged on to BLF in over a week.
That Canadian flashlight guy & Lantern Guru -Den / DBSARlight
I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice. The tint is very even, but still not perfect, the corona ist yellow.
I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.
Project Excalibur - Next Generation LED Thrower (UPDATE 2018-01-15: 1.7Mcd)
Portable Thrower Comparison
This seems really nice…
Would you spare some with me ?
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
Sorry, I only got a very small amount which I intend to use all.
Project Excalibur - Next Generation LED Thrower (UPDATE 2018-01-15: 1.7Mcd)
Portable Thrower Comparison
Understood
Anyone else in EU ?
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
If I keep them they will all be used, but I can spare 2 leds for good cause.
Unless someone else has bought too many?
link to djozz tests
I’m also interested in trying an LH351D it in a reflector light, so I might stick one in my C8, which is kind of ugly with a 219C. It looks great as drop-in replacement in all the 3V Armytek lights and also behaves much better with a XP-L size optics because the size is much closer. I’m really happy to have an option that is physically so similar to the XP-L. I do notice a tint shift with current as well, but it looks pretty good on all levels, and especially at higher output. Since the 219C is often a little green to begin with it subjectively seems rather similar side-by-side.
That’s really nice from you Djozz !
To be honest was hoping to buy 4 for a single and a triple but I can always test it with one or two and buy more later if this can happen
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
Anyone else wanting to help out a dedicated french modder with a couple of leds?
link to djozz tests
Mine are stuck in customs at the moment.
But I’ll do the same as djozz.
When I have them in my hands I’ll send two to France.
X3, I’ll send you a Pm, when they arrive!I’d like to help you X3, but I live in Quebec, and shipping would cost quite a bit.
So, until I come to France this summer to hand you some 351Ds, I wish you good luck.
My very own high current Beryllium Copper springs Gen 3:
http://budgetlightforum.com/node/67401
Liitokala Aliexpress Stores Battery Fraud: http://budgetlightforum.com/node/60547
I had 4 reserved for a Nightfighter 40S,but Led4Power may be stocking 90 cri 3v MZ’s,so I can do up to 4 LH351D’s.
LOL I wasn’t expecting that much help !
I’m underestimating BLF though, this place has proven more than once to be filled by big hearted people
Please give me your price, including shipping via PM
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
Also with me the Led’s have arrived now! Very nice light color, exactly my taste.
Thank you again !!!!
my collection and my modding projekts
Thanks to Billy X whos spared 4 LEDs with me
"-X3-, is there any place in your house without a flashlight ?"
My Flashlight public album (mods, emitter swaps, eye candy)
My reviews channel (French language, Olight, Thorfire, Sofirn, Lumintop : 60+ lights tested)
My personal channel (including Olight SR mini, S1, S2, S1A and S-mini disassembly)
M4DM4X blog, saves you $$$
link to djozz tests
nice
καὶ τὸ φῶς ἐν τῇ σκοτίᾳ φαίνει καὶ ἡ σκοτία αὐτὸ οὐ κατέλαβεν
Dc-fix diffuser film >… http://budgetlightforum.com/node/42208
Pages