Well, in theory, after making firmware with that feature, yes. The driver has an “optic nerve” to allow it to sense light. But it’s not actually used in the stock firmware.
In TLF I have registered one FW3A (219.Meyer on the TLF-list) and opted for a second one. To be on the safe side please put me on the BLF-list with one XPL-HI 3D and one LH351D.
Thanks
Got a message back from Digikey again. And good news!
Great for the FW3A groupbuy, but not too great for smaller buyers.
For individual samples(less than a reel), the tint bins are randomly available from T6, TA, T7 and TB. No wonder the LH351D from Bob Mc Bob looked so green.
For a 1x reel LH351D (like our groupbuy), the only tint bin confirmed and available is T6, so way better than the 2nd and 3rd batch of LH351Ds, so about as good as the 1st batch from AEDe, but still not the godly T2/T4 bin.
HOWEVER, for 4x reels of LH351Ds, the tint bins are confirmed and available in the T4 and T6 bin, and the T4 bin is way below the BBL and closer to 3900-4000k rather than 4100k-4000k according to the Digi-Key rep. That is very good.