Second Generation Silver Plated High Current Beryllium Copper Springs and 95+CRI SST20!

Please add 15x LH351D to my order.
Thank you

The T6 and T7 bin were above the BBL. Without reflector or optics, they look decent, but once put in an optic, it turns green. How much is a reel? You don’t think we can reach the numbers? Maybe if we split the order with Richard, Intl_Outdoor, Kaidomain?

@SKV89, the T6 bin is the one showed in the pictures in a Q8 reflector. It looks marvelous compared to the 2nd batch LH351Ds from AEDe which were a higher TA tint bin if I remember well, and looked not good in a reflector.

And if I buy a full reel, it’s going to cost about 1320$CA at minimum without taxes.

So yeah, not going to take the risk until I find a source of confirmed T1-T4 tint bins without having to buy over 3000 emitters.

Oh I misread. I thought we can choose the T1-T4 tint bin if we buy a full reel. If that’s the case, I’m not interested in the LH351D.

The tint in your photos look even rosier than the 219B 9080. I bought the Meteor M43 with the first batch of LH351D in this test. Here are the test results showing a duv of 0.0024. Not sure how accurate that is because it looks even higher in person compared to my other lights. It looks very green compared side by side with the stock XP-L HI 5D and even greener next to the XP-G2 5D. So green, that I’m planning to discard these emitters and put in a rosier one from this GB.

You put it in an M43, right?

Try testing it without the AR lens.

And don’t forget that the emitters in my Q8 are overdriven quite a bit, and no, it’s not that close to the 219B R9080. It’s way better than the 219C 5000k, a bit rosier than the XP-L HI 5D found in my GT Mini, and not as rosy as the 219B found in the A01.

I just saw the beam like that in real life. I’ve seen the 219B and real life, and it’s way too rosy in my opinion. I like a pure creamy 4000k myself. Never got attracted to the 219B.

I got real lucky with these 4 LEDs. They were the ones producing the highest light, and the least green of any of my LH351Ds.

It looks a lot better without any glass or optics and less green than 219C but not as nice as the Cree 5A/5D tint for sure. Cree 5A/5D and E21A 4000k tint are the best 4000k tint I’ve seen.

Strange that your pics shows tint that is rosier than Cree 5A/5D and E21A. Maybe our eyes see things differently lol

If BlueSwordM is implying that is how the first batch from AEDe looks in person i’m going to disagree. Some special camera work going on there for sure.

For a moment I was thinking that might be how our eyes perceive thing differently on the screen and in reality. The tint in those pics look even rosier than my 219B 9080 4000k and 4500k that I see in person lol.

I probably didn’t adjust it right on the camera.

Will redo pics next week.

I’m in for 20 large + 20 small

Thanks for making these available

Added.

BTW, I’m going to log off of BLF for the week because of exams.

I’ll see you Friday evening :slight_smile:

All the best for the exams. :beer:

20 large
20 small
6 SST-20 4000k 95CRI
6 LH351D 4000k

I’m in for 55 Large/ 55 small springs for me. I need to fully wake up befor deciding on the leds.

Could you please add 10 more small and 10 more big springs for me? That would be 30 big and 30 small springs in total. I like the way these springs fit together in a dual high current capable array. Very nice design! Thank you!

30 Large springs
30 Small springs
10 SST-20 4000k
Thank you!

Hmm… maybe…

…but for now, since you’ve already got me on the list, you might as well put some kinda numbers beside my name. Let’s make it 50 each of the large and small springs. :smiley:

I’ll have to think more on the emitter options. :blush:

Interested in some emitters but need to decide which and how many. Also dependent on rosiness! :blush:

Double my 3500K SST-20's please, from 10 to 20. Thanx!