Second Generation Silver Plated High Current Beryllium Copper Springs and 95+CRI SST20!

please add 15x SST-20 3500K.
thank you

I have a question. I have a E2L and would like to put some new leds in it. Which led should i take SST-20 4000k 95CRI or LH351D 4k?

I'l go in for my qty 20 early for the SST-20 3500's.

@TheOnlyDocc, you will get higher R9 and more throw with the SST-20.

Since you are using it in a small EDC triple, I would just go for the SST-20 for better usability at lower lumen levels.

BlueSwordM 10pcs
Pavlo 4pcs
skinny_tie 5pcs
HONDARIDER 5pcs
808HI 15pcs
Tom E 20pcs

Total for now: 59pcs

We need about 41 more SST-20s 3500k to get to the lower price bracket.

Thanks BlueSwordM!
Please add 3 SST-20 4000k 95CRI to the springs. But i will wait for the springs to be shipped together.

Ok then, no problem there.

And besides, I’m not ordering the 4000k version YET anyway. Only the 3500k variant.

Will you add 8x of the SST-20 LEDs to my order please… (3500k)

Thanks

If you aren’t ordering the 4000k, I’ll grab another 4 x 3500k for a total of 8.

Thanks

Yeah I’m not ordering the 4000k version YET. A 5 week lead time does hurt quite a bit.

Edit: I meant that I’m not ordering them yet, until I find a source of good below BBL SST-20s.

So no SST-20 4000k at all? Or will they be available when you get the springs?

The 4000k SST-20 will be available with the springs, no problem there.

I’m just trying to find a lead for below BBL SST-20 4000k 95CRI, and I haven’t yet.

I’m really sorry if it’s taking a long time. Trying to find tight bins on new LEDs is really hard, since I have to ask places like Digikey, Mouser, Arrow, Cutter, etc, to see if they stock specific tint bins of the LED, and most of the time, they say no, they either have no stock, or the stock they have isn’t what we want :frowning:

Then make my (10) 4000k order, 3500K instead.

No, no. I’ve edited my post.

I meant that I’m not ordering them yet, until I find a source of good below BBL SST-20s.

If I can find SST-20 4000k under the BBL this January, then I’ll order the springs and SST-20s 4000k at the same time.

Otherwise, I’ll just get the springs.

Thats ok. I am not in a hurry. If it takes a bit longer i wait patiently!

Ok I’ll order 10 SST-20 3500k. Would have ordered more if it was J4 bin but can’t always expect perfect.

Oh yeah, I made a mistake :person_facepalming:

The GA3 bin at Mouser is in stock now, not in the J3 bin, but J4 flux bin.

We hit the jackpot for the 3500k!

The only way we could get the 3500k in the GA4 chromacity bin, as said before, would be to order a full reel, and go down a flux bin.

But J4 flux bin and GA3 tint bin is still great.

It’s a bit problematic with the 4000k version though…

If the 4000k is not available / or to hard to get i will take 3 of the 3500k. With a Vf this low i will have to search for the right driver for a tripple.

Ok then.

Early adopters 3500k SST-20s J4 Flux bin GA3 Tint bin confirmed:

BlueSwordM 10pcs
Pavlo 4pcs
skinny_tie 5pcs
HONDARIDER 5pcs
808HI 15pcs
Tom E 20pcs
SKV89 10pcs

I’ll take another 10 pieces of the SST 20 3500k

I’m interested in 15 large springs, 5 small springs, and 10 of the 3500k sst leds. Thanks!