Interested.
But make a one way deep carry clip. This clip looks terrible.
Interested.
But make a one way deep carry clip. This clip looks terrible.
Looks like the Specifications are updated, thanks Freeme!
BUT, what is this??? -
“Switch: Electronic side switch with a back-up light”
I agree with that, not selling as many if you release them all at once, and i think the raw and black coming later was a good idea as special models. But i do have to say - try buying a colored fw3a right now, they arent available. Sure you can find blue and green on BG, but everything else is gone. So i think in time they really would sell. I think purple and sand/tan would sell very quickly.
Interest List:
Freeme
Bob_McBob
TheAuditor
Brawny
id30209
Cesconetto
TMaxxJJ
cyclops
ymayhem
Templogin
llk
luisgcan
bidas
jasontheguitarist
Yokiamy
pconig
asdqqq
4Null
vkor
MoreLumens
maba
askanswer
MascaratumB
wolfstyle
PS_its_me
weiyin
Aulic458155
treellama
Gunga
Sillen
TILL-22
DarkShot
Sudsy
hpt7
Plasmatoast
denkiman808
antoninuspius
LightsLightsLights
pgenera
Skullker
Dkf1998
CJ Avlis
JaredM
pinkpanda3310
Brinkmann
Dennis
SamuelTheShark
Nooner
Xavier Blak
SpinOrbitCoupling
GreenLights
Jello
bigblf
YYCN8
ROYCEcujo255
Firelight2
joebob4501
Trantor
lumenzilla
Whezzel
Escew
Kavin
Twisted_Saint
SerenityNow
Hey Freeme - im interested. I was the first post here LOL. please add me?
Please indicate your preferred emitter choice if possible.
Manufacturer | Emitter | Output (lumen) | Confirm? |
CREE | XP-L HI | 2800 | No (unable to fit) |
CREE | XP-G3 | 1400 | Yes |
NICHIA | 219C (4000K/ 5000K) | 1200 | Yes |
Luminus | SST20 (6500K) | Yes |
Interested! SST20 4000k high-CRI. Deep carry clip please. Also other models like single emitter and titanium would be awesome. Thanks!
Vapcell H10 light for sure
Absolutely, or the Keep power version. I believe 14500 lights with the A6 driver can draw up to around 6.5 amps and I’d expect this to draw more even though I think the final spec. will be considerably less then the 2800lm shown.
interested
Interested
Triple would be nice with some small, flat emitters. Like Luxeon CZ or Boost HM.
But considering that the PCB is going to be custom and therefore it will be hard to convert to another footprint, 3535 might be a better choice. And it will be very very floody with any good 3535 emitter that’s available with high CRI. So…i like the uniqueness. I love how it shaves a couple of mm from the length. But I think that a single emitter would be overall a better choice.
ADDED:
I see that there’s an emitter choice posted a while ago. As expected, all options are 3535.
I would say SST-20 because it’s relatively throwy. But warm CRI-95 only, no 6500K EDC.
BTW, XP-P might be a fun choice. Though I wouldn’t pick one.
I’m already on the list, but will add my preference for the LEDs. I would love warm high-CRI SST-20 (either 2700k or 4000k, doesnt matter too much to me). I have no interest on the cool white SST-20, so if the options remain the same I would choose the Nichia 219C 4000k.
Tint and temp >>>>>>>>lumens
I’m already on the list, but will add my preference for the LEDs. I would love warm high-CRI-95 SST-20 (either 2700k or 4000k, doesnt matter too much to me). I have no interest on the cool white SST-20, so if the options remain the same I would choose the Nichia 219C 4000k.
Tint and temp >>>>>>>>lumens
^ My thoughts exactly.
For me already interested, with nichia 219c 5000k thanks Freeme.
Interested!
yes, please!
Interested
Interested NICHIA 219C 4000K depending price
Please indicate your preferred emitter choice if possible.
Manufacturer
Emitter
Output (lumen)
Confirm?
CREE
XP-L HI
2800
No (unable to fit)
CREE
XP-G3
1400
Yes
NICHIA
219C (4000K/ 5000K)
1200
Yes
Luminus
SST20 (6500K)
Yes
I am already on the list!
My preference will be Nichia 4000K!
Then I will do my mod…
I will buy:
(2) nichia 4000k
Ok now I’m starting to see the value of a single emitter option. I would reflow a sst40 5000k in this.
Either way I’ll probably put triple cslnm1 in one, and keep the other with nichia 4000k